User manual SHARP 66CS05H OPERATION MANUAL

[. . . ] This guarantee does not apply to equipment used in the course of a business, trade or profession. This guarantee does not cover any faults or defects caused by accident, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempted at adjustment or repair other than by an approved Service Facility. In the unlikely even of your equipment requiring repair, please contact the Dealer or Supplier from whom it was purchased. 5. The cost of carriage to and from the Dealer, Supplier or Sharp approved Service Facility shall be borne by the purchaser. [. . . ] This VPS signal is sent by some broadcasting stations, when the programme that is being shown is not suitable for children. TIMER: The access to the selected programme will be protected during the programmed period. If you have selected TIMER, press the Cursor UP/DOWN buttons E/F to select: Start : To enter the hour and minutes, from the beginning of protection, with the Cursor LEFT/RIGHT buttons End: To enter the hour and minutes, to the end of protection, with the Cursor LEFT/RIGHT buttons 9. Press the MENU button q to close the LOCK PROGRAMME Menu. C/I . C / I. CLEAR LOCK Menu This option enables you to erase all the adjustments made to the CHILD-LOCK function. Press the BLUE button Press the BLUE button CHILD LOCK system. to see the CLEAR LOCK Menu to confirm you want to clear the CLEAR LOCK Menu Notes:In order for the timed protection to function correctly, the internal TV clock must be set at the right time. To check the time setting see section - Automatic or Manual time adjustment - (page 23). When you protect one programme, all the external entries (Euro-SCART, AV-1, AV-2, Front A/V or S-Video terminals) are protected automatically. Access to protected modes LOCK ALL: When the TV is protected in this way, it will be blocked when switched on and a red box will appear on the screen (against a blue background), along with the instruction « LOCKED MODE ». In order to view your TV you must press any digit button 0 ~ 9 of the remote control. If the protection is timed, the blocking of the TV will only occur during the time period programmed. LOCK PROGRAMME: When one or several programmes are protected, the TV will block any attempt to gain access to them and the instruction « LOCKED MODE » will appear on the screen. Press the TEXT/MIX/PICTURE button a/b/a twice to go out from Teletext Mode. Page Selection a) Fast Page Selection Select the appropriate programme channel. Press the TEXT/MIX/PICTURE button a/b/a twice to select the Teletext Mode. To recall a page number displayed in the coloured brackets, simply press the corresponding coloured button ~ b) 0~9 Digit buttons Enter a desired page number with the 0-9 digit buttons. c) Page selector (UP/DOWN) You can sequentially select page numbers by pressing the buttons . E/F . 28 Other Teletext features TEXT/MIX/PICTURE button a/b/a. In TV Mode: Press the TEXT/MIX/PICTURE button a/b/a to select SPLIT SCREEN mode (Picture & Teletext). This feature allows the user to watch a Teletext page on the right hand side of the screen while on the left hand side is shown the normal TV programme. In SPLIT SCREEN Mode: Press the TEXT/MIX/PICTURE button a/b/a to select the Teletext Mode. In TELETEXT Mode: Press the button again to superimpose a Teletext broadcast onto the current TV programme screen (mixed Mode). In MIXED Mode: Press the button again to return to the normal TV screen (current program). NOTE: If you are in SPLIT SCREEN mode (Picture & Teletext) the Cancel button is not available. SPLIT SCREEN Mode MIXED Mode HALF PAGE button s Each time you press the button, the upper/lower half of the Teletext page is magnified and displayed on the screen. [. . . ] If the video cassette is protected against recording, it will be ejected. Stop button Press this button to stop playback or recording. Operate button Bl VCR Press this button to turn your VCR on. Fast forward/picture search forward and Rewind/picture search reverse Both these buttons have the following function: buttons Fast forwarding and Rewinding To move through the cassette faster, press the STOP button to stop and then press the button to fast forward or rewind the cassette. [. . . ]