User manual SHARP 66CSD8H FRONT COVER TO PAGE 19

[. . . ] This guarantee covers equipment intended for private domestic use only. This guarantee does not apply to equipment used in the course of a business, trade or profession. This guarantee does not cover any faults or defects caused by accident, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempted at adjustment or repair other than by an approved Service Facility. In the unlikely even of your equipment requiring repair, please contact the Dealer or Supplier from whom it was purchased. [. . . ] Press the MENU button G to close the ON TIMER Menu. Press the Stand-by button ( æ TV) on the remote control to put the TV set into Stand-by Mode. When the preset time is reached, the TV set turns ON and a picture appears on the screen. As a safety precaution, in the case of nobody being home when the television switches on automatically, the television will disconnect itself after 120 minutes; if it is to continue to run, any button on the remote control functions should be pressed. Note: In the event of a power cut, disconnection from the plug or television switch, all the data on the ON TIMER will be cancelled. TIMER Menu OFF -TIMER The OFF-Timer is used to programme switching the TV set to Stand-by mode, after the set length of time has passed. Press the Cursor UP/DOWN buttons E/F to select "Off timer status". The red point mark indicates the selected item. Press the Cursor LEFT/RIGHT buttons C / I to select the desired period (05 ( 180 minutes). Press the MENU button G to close the OFF -TIMER Menu. 5. Note: The off timer data will be cancelled if you turn off the TV by the Stand-by button ( æ TV) on the remote control or with the Main power button (®) on the TV set. 19 Help Your TV is provided with Interactive Help, indicated on screen with the symbol, which contains guidance for TV operation. With the option Help On/Off, you can display or hide the Help boxes. Press the MENU button G to see the MAIN Menu. Press the YELLOW button to see the Timer Menu. If you wish to cancel all the data, select «Eliminate post code and password» and press the BLUE button 12. Press the MENU button G to close the Menu. . About Post code: If you memorize a «Post Code», in the event of lose or robbery of TV set and later recovery, you can identify your TV set by «Post Code». Notes: As a precautionary measure, make a note of your «Password» and the «Post Code», and keep it in a familiar place. IF YOU LOSE OR FORGET YOUR «PASSWORD», CONTACT YOUR TECHNICAL SERVICE OR DEALER. 20 Child lock (Protection) You can lock a TV channel to prevent unsupervised TV viewing by following these procedure. The protection can apply to the television itself «LOCK ALL» or to specific programmes «LOCK PROGRAMME». With the CHILD LOCK function, you can also programme a time period during which the TV or the programmes will be protected. (Your children can not select the channel which you locked). Press the MENU button G to see the MAIN Menu. Press the YELLOW button to see the Timer Menu. MAIN Menu Timer Menu 3. Press the RED button to see the LOCK ALL Menu. Timer Menu LOCK ALL Menu Use this option for protecting the access to the whole TV. If you wish to block some specific programme, press the YELLOW button and proceed to stage 5. [. . . ] To exit this mode press h button again on the remote control. Time button f Press the button to display the current time on the screen. Note: that this function operates only if the tuned station broadcasts a teletext signal. 33 VCR mode SHARP VCR can be operated using the TV remote control. Channel selectors CH These buttons are used for changing channels and setting the timer. Play button Press this button to start playback. [. . . ]