User manual SHARP 76FW-53H OPERATION MANUAL SPLIT - PART 2 PAGE 2-13

[. . . ] 10 Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Wide Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Audio Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 On Timer and Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the Stand-by button (Bl TV) again and the TV will return to Stand-by mode. Blue back off timer If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automatically switch to Stand-by mode after 15 minutes. Real Channel Number (terrestrial/cable TV Programmes) Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in hand. Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your own channel number to a real channel and store it in the programme preset memory. CORRESPONDING REAL CHANNEL STATION SIGNALS VHF UHF C A T V I-1 (A) ÷ I-9 (J) I-21 ÷ I-69 M1/S1 ÷ M10/S10 U-1/S-11 ÷ U-10/S-20 S-21 ÷ S-41 REAL CHANNEL NUMBERS CH-01 ÷ CH-09 CH-21 ÷ CH-69 CC-01 ÷ CC-10 CC-11 ÷ CC-20 CC-21 ÷ CC-41 CC-42 ÷ CC-63 CC-64 ÷ CC-68 FREQUENCY MHZ 45. 75 ÷ 215. 25 471. 25 ÷ 855. 25 105. 25 ÷ 168. 25 231. 25 ÷ 294. 25 303. 25 ÷ 463. 25 48 ÷ 304 69. 25 ÷ 98. 25 7 Auto Installation Auto Installation System Your television set is provided with an Automatic Installation System which makes Installation easier. This new system is activated when you turn on the TV for the first time. Put batteries into the remote control and connect the antenna jack into the antenna input terminal at the rear of your TV, as shown on pages 3 and 4. 2. Connect the TV power cable to a 220 ~ 240 V system. CH 3. Press the main power button ( I), on the right hand side of the TV set, to start the "AUTO INSTALLATION". The "AUTO INSTALLATION" message will appear on your TV screen. Power indicator Main power button · The TV is ready to preset automatically all local channels for you. the TV is being used · If pre-recorded tape. with a VCR, turn on the VCR and play back a VCR 6. Now, press any button on the TV remote control and follow the instructions on the screen, to start Auto Channel Preset. Automatic Channel Sorting System (ACSS): The TV set SEARCHES FOR FREQUENCIES, memorises the channels found, and sorts them (according to technical criteria) from Pr-01 of the TV, to a maximum of 99 programmes. Notes: This tuning process may take several minutes to perform. If you need to repeat the "AUTO INSTALLATION", please read TV Channel Setting (page 28). Automatic searching and sorting. Press the menu button to cancel. Stored programmes: When the AUTOMATIC SEARCH has been completed, the "Stored programmes" Menu will appear on screen and you can change the order of the channels and change or give the channels a four letter name with the available options: a) Select programme to be edited. For a more detailed explanation see page 9. If you wish exit from the menu, press the BLUE button. 8 Stored programmes Menu a) Select programme to be edited. Use this option to select a programme from the list. Each time you press E or F the memorised channel will be viewed and will remain selected on the list by means of white background. Stored programmes Menu b) Delete this programme. Use this option for cancelling programmes which are badly tuned or repeated. b. 1 Select the programme (Pr) you wish to delete using Cursor UP/DOWN buttons E/ F (marked with white background). [. . . ] Press the MENU button G to close the OTHERS Menu. 12 Wide Mode Fast Menu With this menu you can select the width of the picture: AUTO, PANORAMA, FULL, NORMAL, ZOOM 14:9 or CINEMA, by pressing the WIDE MODE button. Each time you press the WIDE MODE button, the width of the picture changes as indicated: WIDE MODE Button AUTO * v PANORAMA v FULL v NORMAL v ZOOM 14:9 v CINEMA When you Select: PANORAMA, ZOOM 14:9 or CINEMA, 4 options appear on the screen: G V-SCROLL: Press the RED button to see the Vertical SCROLL menu. G V-SIZE: Press the GREEN button to see the Vertical SIZE menu. G NORMALIZE: Press the YELLOW button to normalize the Vertical SCROLL and SIZE, . G EXIT: Press the CYAN button to quit the menu. Vertical SCROLL menu Vertical SIZE menu G V-SCROLL menu: Press the Cursor LEFT/RIGHT buttons G V-SIZE menu: Press the Cursor LEFT/RIGHT buttons C / I to adjust the Vertical SCROLL (UP/DOWN). [. . . ]