User manual SHARP AL-1217D/1457D/1555

[. . . ] This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. The label ( ) in the fusing area of the unit indicates the following: : Caution, risk of danger : Caution, hot surface Follow the cautions below when using this unit. Exercise care in this area when removing misfed paper. [. . . ] Scanning is not possible during a copy and print job. If you perform a pre-scan (see the online manual or the help file for the scanner driver), the original in the SPF/ RSPF will be output to the exit area after scanning. To scan the original after the pre-scan, place the original in the SPF/RSPF once again. If you use more than one scanning device, select the scanner you want to use through the application. the method for accessing the "Select Scanner" option , depends upon the application. For more information, see the online manual or the help file of your application. Click the "SHARP AL-xxxx" (where xxxx is the model name of your unit) icon and click "Get picture" in "Imaging Tasks". After completing each setting, click "Next". When scanning ends, select the next task you wish to perform. I'm finished working with these pictures. The online manual provides detailed instructions for operating the unit as the printer or scanner and a list of methods for dealing with printing or scanner problems. To access the online manual, your computer must have Acrobat Reader 5. The online manual can be printed out using Acrobat Reader. SHARP recommends printing out the sections which you refer to regularly. If you use another GDI printer or a Windows Printing System printer, interference between printers may occur and printing may not be performed properly. To use another GDI printer or a Windows Printing System printer, you must change the port setting of the printer driver using the following procedure. If another printer does not operate properly when the SHARP Personal MFP series printer driver is set to "FILE" as described below, uninstall the SHARP Personal MFP series printer driver. Right-click the "SHARP AL-xxxx" (where xxxx is the model name of your unit) icon in the printer dialog box and then click "Properties". Click the "Ports" tab ("Details" tab - on Windows 95/98/Me) in the "Properties" dialog box, select "FILE:" in the "Print to the following port" list box, and click the "OK". right-click the icon of the printer to be used and click "Properties". Click the "Ports" tab ("Details" tab - on Windows 95/98/Me) in the "Properties" window, select "LPT1" (or the currently used port), and click the "OK" button. To use the SHARP Personal MFP series again, perform the same procedure but select the port to be used (for example, LPT1) in step 4. [. . . ] No amendment to or modification of this License will be binding unless in writing and signed by a duly authorized representative of SHARP. As an ENERGY STAR® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. "This program is about to install Sharpdesk imaging, which does not support LZW compression. "This program is about to install Sharpdesk imaging, which does not support LZW compression. [. . . ]