User manual SHARP AL-1655CS

[. . . ] MODEL AL-1655CS DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL Page PREPARATIONS LOADING PAPER MAKING COPIES CONVENIENT COPY FUNCTIONS SETTING UP THE SOFTWARE PRINTER/SCANNER FUNCTIONS USER SETTINGS TROUBLESHOOTING AND MAINTENANCE APPENDIX 9 18 24 30 40 59 64 71 93 MODEL AL-1655CS FOR YOUR PROTECTION. . . To aid in reporting this unit in case of loss or theft, please record below the model number and serial number located on the back of the unit. We also suggest you record all the information listed and retain for future reference. MODEL NUMBER DATE OF PURCHASE Dealer Address State Service Station Address State Zip City Telephone Zip City Telephone SERIAL NUMBER To obtain service, or to obtain product literature, accessories, or supplies, please call or 1-(630)378-3590 in the USA 905-568-7140 in Canada. For customer assistance, please visit http://www. sharpusa. com/ (for USA) or http://www. sharp. ca/ (for Canada) on the World Wide Web or call 1-(630)378-3590 (for USA). Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copying by national law. [. . . ] The paper is outside of the specified size and weight range. Use copy paper within the specified range. During periods when the machine is not used for a long time, remove the paper from the tray and store it in a dark place in a bag to prevent moisture absorption. Make sure that the paper is properly loaded. If the stack of paper is higher than the indicator line on the tray, remove some of the paper and reload so that the stack does not exceed the line. The guides on the bypass tray do not match the width of the paper. Adjust the guides to match the width of the paper. The bypass tray extension is not opened. When loading a large size of paper, open the extension. The scanner glass for the RSPF is dirty. Clean the long, narrow scanning window. The TD cartridge or drum cartridge is dirty. Clean the TD cartridge or drum cartridge. Page 80 18 - 19 81 19 20 22 22 89 8 90 91 75 TROUBLESHOOTING AND MAINTENANCE Problem Cause and solution Copying or printing is performed. Set the paper size after copying or printing is complete. Paper size for a paper tray cannot be set. The machine has stopped temporarily due to running out of paper or a misfeed. Load paper or remove the misfeed, and then set the paper size. "MEMORY FULL, PRESS START TO RESUME. " appears in the display. The memory became full during sort copy. Copy only the originals that have been scanned to that point, or cancel the job and clear the data from memory. If other indicators are lit, the machine is in preheat mode. [. . . ] 35 - RSPF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Automatic two-sided copying - Document glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 - RSPF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Margin shift, using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]