User manual SHARP AL-2050CS

[. . . ] MODEL AL-2050CS DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL (for general information) Page PREPARATIONS LOADING PAPER MAKING COPIES CONVENIENT COPY FUNCTIONS INSTALLING THE SOFTWARE PRINTER/SCANNER FUNCTIONS USER SETTINGS 9 18 24 30 40 57 62 TROUBLESHOOTING AND MAINTENANCE 69 APPENDIX 91 FOR YOUR PROTECTION. . . To aid in reporting this unit in case of loss or theft, please record below the model number and serial number located on the back of the unit. We also suggest you record all the information listed and retain for future reference. MODEL NUMBER DATE OF PURCHASE Dealer Address State Service Station Address State Zip City Telephone Zip City Telephone SERIAL NUMBER To obtain service, or to obtain product literature, accessories, or supplies, please call 1-(630)378-3590 in the USA. For customer assistance, please visit http://www. sharpusa. com/ (for USA) on the World Wide Web or call 1-(630)378-3590 (for USA). Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations. Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copying by national law. [. . . ] selected when the bypass tray is already selected , or the bypass tray is selected when two-sided printing or 2 IN 1 copying is already selected. NO 2IN1 COPY FROM The bypass tray cannot be used. the [TRAY SELECT] key ( ) to select a paper tray. 2 IN 1 copy and margin shift cannot be NO 2IN1 COPY WITH MARGIN SHIFT. Cancel the function that was selected last. COPY RATIO CAN NOT BE Copy ratio can not be changed in 2 IN CHANGED IN 2IN1. This appears if you attempt to change THIS MENU IS NOT SELECTABLE a user program setting while a print job WITH DATA. Press the [MODE SELECT] key to switch to printer mode and follow the instructions NO XXXX SIZE TRAY in the display. ("XXXX" indicates paper size) An original remains on the document glass, or the original is too thick to scan. If the message is not cleared when there START TO RESUME. is no original on the document glass, the underside of the RSPF is dirty. (especially areas where black lines appear. ) Printing is not possible if the paper size setting is different from the size of paper loaded in the tray. Load the same size of paper as the paper size LOAD XXXX PAPER INTO TRAY<*>. setting and then press the [START] key ( ). The tray is indicated in <*>. ) The machine is not correctly connected NO PC COMMUNICATION; CHECK to the computer. (when using the scanner function). 30 35 35 38 29 35 62 - 25 87 19 46 70 TROUBLESHOOTING THE MACHINE The following problems are related to the general operation of the machine and copying. Problem Cause and solution The machine is not plugged into a power outlet. Plug the machine into a grounded outlet. Indicates that the machine is warming up. Copies cannot be made until the machine has finished warming up. The front cover or the side cover is not completely closed. Close the front cover or the side cover. [. . . ] - RSPF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic two-sided copying - Document glass. . . . . . . . . . . . . . . . . . . . . . . . . . . - RSPF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Margin shift, using . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]