User manual SHARP AL800 OPERATION MANUAL

[. . . ] 1 ENGLISH Getting Started GETTING STARTED This chapter provides basic information for using the SHARP AL-840 printer and its features. INTRODUCTION The AL-840 can be used as a copier and a laser printer. This manual describes only the printer features of the AL-840. To use the AL-840 as a copier and to learn additional information which relates to both the copier and printer features, see the copier manual. To get full use of all printer features, familiarize yourself with this manual. [. . . ] For this description, it is assumed that the mouse is configured for right hand operation. 3 The properties of the SHARP AL-800 Series printer driver will be displayed. If you use Windows 95/Windows 98, click the Driver Setup tab to display the following screen. * Screen on Windows 95 ENGLISH Printing Apply button The settings which have been selected by each tab will be saved. *This button is not displayed on the Windows NT4. 0. OK button All driver settings which have been selected by each tab will be saved and the properties will be terminated. Defaults button The settings which have been selected by each tab will be returned to their default state. Default All button All settings which have been selected by all tabs will be returned to their default state. Cancel button The settings which have been selected by each tab will be canceled and the properties will be terminated. However, the settings which have been saved will not be canceled. 13 SETTING PRINT CONDITIONS FROM PRINTER DRIVER Windows 3. 1x: 1 2 3 ENGLISH Printing Double-click the Print Manager icon in the Main window of Program Manager. Select Options in the Print Manager and then select Printer Setup. Select SHARP AL-800 Series in the Installed Printers: and click the Setup button. 4 The properties of the SHARP AL-800 Series will be displayed. The following items can be set with the printer driver. Paper/Output Copies Paper Source Paper Size* 5 Specifies the number of sets to be printed. Any number from 1 to 50 can be selected. (default setting: 1) Specifies a paper feed station in the printer. (default setting: Paper Tray) Specifies the size of the paper to be printed. The paper sizes that can be selected are Letter, Legal, Invoice, A4, B5, A5, Folio, Foolscap, etc. (default setting: Letter or A4 depending on the countries or regions) * Custom sizes cannot be set for this printer. (default setting: portrait) Specifies collated printing or group printing. (default setting: collated) Specifies printing order. If reverse order is specified, printing will start from the last page. (default setting: selected) Multiple pages can be printed on a single sheet. Two pages or four pages can be selected. (default setting: 1 page) Page orientation Collate 6 7 Reverse Order N-Up Image Quality Lighten/Darken Contrast Resolution Output Type Any number from 0 to 100% can be set. (default setting: 50%) Any number from 0 to 100% can be set. (default setting: 50%) Specifies 300 dpi or 600 dpi. (default setting: 600 dpi) Specifies output type: Normal, Photograph, Text, Toner Save or Advanced. (default setting: Normal) 8 9 Tricks The Tricks tab is used to accommodate programs that interface with printer drivers in nonstandard ways. [. . . ] Cancel the current operation, turn the product off, check the cable connection, then back on, retry the operation. ENGLISH Printer trouble? ­ *2: See the section on DRUM CARTRIDGE REPLACEMENT. *3: See the section on INSTALLING THE TD CARTRIDGE. *5: See the section on LOADING COPY PAPER. USING OTHER INSTALLED DRIVERS If you use another GDI printer or a Windows Printing System printer, interference between printers may occur and printing may not be performed properly. To use another GDI printer or a Windows Printing System printer, you must change the port setting of the printer driver using the following procedure. [. . . ]