User manual SHARP AN-3DG10R

[. . . ] AN-3DG10-S AN-3DG10-R AN-3DG10-A 3D GLASSES FOR SHARP 3D AQUOS OPERATION MANUAL ENGLISH These 3D Glasses (AN-3DG10-S/R/A) are only for use with Sharp AQUOS LCD TVs supporting 3D. For details of how to make adjustments for 3D functions and to fully enjoy 3D viewing, refer to the operation manual of your TV. IMPORTANT INFORMATION This product contains a CR Coin Lithium Battery which contains Perchlorate Material ­ special handling may apply, California residents, See www. dtsc. ca. gov/hazardouswaste/perchlorate/ U. S. A. ONLY Printed in China 10P08-CH-NM EN-1 DEAR SHARP CUSTOMER Thank you for your purchase of the 3D Glasses for Sharp 3D AQUOS. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS 3D Glasses Prevention of accidental ingestion · Keep the batteries and band accessory out of the reach of small children. [. . . ] · When using the 3D Glasses, take care not to accidentally strike the TV screen or other people. Viewing 3D images may cause you to misjudge the distance to the TV screen and accidentally strike the screen, resulting in possible injury. Supplied Accessories Make sure the following accessories are provided with the 3D Glasses. 3D Glasses (×1) 3D Glasses band * (×1) Nose pad * (Large ×1, small ×1) Glasses case (×1) Cleaning cloth (×1) Precision screwdriver (Phillips ×1, slotted ×1) Operation Manual * Use the 3D Glasses band and nose pad as needed. · The illustrations above are for explanation purposes and may vary slightly from the actual accessories. EN-3 Using the 3D Glasses Part Names 12 1 Power button · Press for at least 2 seconds to turn on and off the 3D Glasses. · When the 3D Glasses are turned on, pressing this button switches between 2D and 3D modes. 2 LED light · Blinks 3 times when the power is turned on. · Blinks 2 times when 2D mode is selected. · Blinks 3 times when 3D mode is selected. · Blinks 6 times when the battery power is low. · Lights for 2 seconds when the power is turned off. Service terminal This terminal is for service use only. Please do not connect any other device to this terminal. Infrared receiver Receives an infrared signal sent from the TV. The 3D Glasses turn off automatically after 3 minutes if no signal is received from the TV. Nose pad mount The dedicated nose pad can be mounted here. 3D Glasses band mount The dedicated 3D Glasses band can be mounted here. 3 3 4 6 4 5 6 5 · Do not soil or apply stickers or other obstacles to the infrared receiver. Doing so may block signals from the TV and prevent the 3D Glasses from working correctly. · Interference from other infrared communications equipment may prevent you from viewing 3D images correctly. Attaching the Nose Pad Attach either of the supplied nose pads as needed (such as when the glasses do not fit properly). The glasses come with a large and small nose pad. Attaching the 3D Glasses Band Attach the supplied 3D Glasses band strap as needed (such as when the glasses do not fit properly). Insert the ends of the 3D Glasses into the 3D Glasses band until they are secure. · Pull the cord stopper on the strap to adjust the strap length. Attaching the nose pad Removing the nose pad 1 2 1 EN-4 Using the 3D Glasses Before Using the 3D Glasses Before using the 3D Glasses for the first time, remove the insulating sheet attached to them. Using the 3D Glasses Turning On/Off the Power Turn on the power of the 3D Glasses. · Press the power button for at least 2 seconds. · The LED light blinks 3 times. Turn off the power on the 3D Glasses. · Press the power button for at least 2 seconds. · The LED light lights for 2 seconds. Replacing the Battery The battery has an expected service life of approximately 75 hours. · When the battery power is low, the LED light blinks 6 times after the power is turned on. · When replacing the button battery, use only the designated battery (Maxell branded CR2032 lithium button battery). 1 Loosen the screw used to secure the battery cover. [. . . ] This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may vary. Please contact 1-888-GO-SHARP for further information. [. . . ]