User manual SHARP AQUOS LC-20AV4U OPERATION MANUAL

[. . . ] OPERATION MANUAL FEATURES LCD COLOR TV LC-13AV4U (13 INCH EASEL TYPE TABLE STAND) LC-15AV4U (15 INCH PEDESTAL TYPE TABLE STAND) LC-20AV4U (20 INCH PEDESTAL TYPE TABLE STAND) MTS/SAP Tuner 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels. PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection and lets you tune directly to any channel using the Number buttons (0~9 and +100-key) on the remote control. On-Screen Function Display Remote Control Sleep Timer Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Auto Shut Off Function- If there is no signal input from the antenna terminal for 5 minutes or no user operation for 180 minutes, the TV will turn itself off automatically. [. . . ] Note: When you turn off the TV, disconnect the TV from the AC outlet or when you have a power failure, the Sleep Timer will be lost. You can check the remaining minutes on your sleep timer by pressing the DISPLAY button. [To Select STEREO, MONO or SAP in Stereo broadcast] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH or button to point to "TV SOUND". 3) Press the VOL + or ­ button to select your desired stereo mode. ([MAIN], [MONO] or [SAP]) Press or 4) Press the MENU button to exit the menu. - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] OPTION - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MONO] BACK LIGHT [BRIGHT] OPTION - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [SAP] BACK LIGHT [BRIGHT] OPTION RESUME FUNCTION If the power fails or is disconnected while the TV is powered on, the TV will turn on automatically when the power resumes. WATCHING A TV PROGRAM 1) Press the POWER button to turn on the TV. 2) Select the desired channel with the CH or button or the Number buttons. 3) Adjust the volume to the desired listening level using the VOL + or ­ button. 4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT". ) OPERATIONS (Continued) PICTURE ADJUSTMENT (AV mode, Picture control) 1) Press the MENU button so that the menu display appears Press on the TV screen. or 2) Press the VOL + button so that "PICTURE" is selected. AV mode: Press theVOL + or ­ button to select from 5 picture options that will adjust colors to enhance your viewing experience. AV MODE [DYNAMIC (FIXED)] RESET [NO] YES AV MODE [MOVIE] AV MODE [DYNAMIC] AV MODE [STANDARD] AV MODE [GAME] Picture control: Picture control belongs to above AV mode items in gray only. Press the CH or button to switch Picture control from each AV mode and to change the selection of Picture control, press the CH or button repeatedly. Then press the VOL + or ­ button to adjust each item. BRIGHTNESS + to increase brightness to increase contrast to brilliant to green to clear to decrease brightness to decrease contrast to pale to purple to soft CONTRAST + COLOR + TINT + SHARPNESS + 3) Press the MENU button to exit the menu. Note: In the above steps, the picture adjustment display will disappear from the TV screen automatically after approximately 5 seconds if there is no operation. To return the setting again, repeat steps 1) to 2). [CAPTION MODE] 1) Closed Caption Characters can be displayed on the TV screen only when the received broadcast signal contains Caption Signals. 2) Paint-on mode: Displays input characters on the screen immediately. Pop-on mode: Once characters are stored in memory, they are displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. Note: If [CAPTION1] or [CAPTION2] is selected but a Closed Caption signal is not included, characters will not be displayed. [TEXT MODE] 1) Displays the text on the screen by scrolling (max. 2) If the received broadcast signal does not contain caption or text signals, no change will occur. Notes: 1) When your TV receives a special effects playback signal (i. e. , Search, Slow and Still) from a VCR's video output channel (CH3 or CH4), your TV may not display the correct caption or text. [. . . ] Model Specific Section Your Product Model Number & Description: LC-13AV4U LCD Color Television LC-15AV4U LCD Color Television LC-20AV4U LCD Color Television (Be sure to have this information available when you need service for your Product. ) Warranty Period for this Product: Additional Item(s) Excluded from Warranty Coverage (if any): Where to Obtain Service: One (1) year parts and ninety (90) days labor from the date of purchase. Call Sharp Electronics corporation toll free at 1-800-BE-SHARP for instructions on how to obtain service on your LCD TV. Ship your product, prepaid, as per the instruction given by the Sharp representative at the toll free number (1-800-BE-SHARP). BE sure to have your proof of purchace available. [. . . ]