User manual SHARP AQUOS LC-37D90U OPERATION MANUAL

[. . . ] LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ESPAÑOL FRANÇAIS LC-37D90U ENGLISH LC-37D90U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL · The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. · Menu items that are not selectable are grayed out. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] i. LINK is a term defined in the IEEE1394 (Institute of Electrical and Electronics Engineers) standard. Currently, the transfer speeds are at 100 Mbps, 200 Mbps and 400 Mbps, each of them expressed as S100, S200 and S400 respectively. On this TV, the maximum speed is 400 Mbps. LINK devices that can be connected to this TV D-VHS decks, AV-HDD recorders, Blu-ray Disc recorders, HDV camcorders, STBs and TVs can be connected to this TV via i. LINK. Other devices such as DVD recorders, non-HDV camcorders, computers or computer peripheral devices do not meet the specifications for this TV and therefore cannot be connected via i. LINK. Even for the types of i. LINK device mentioned above, device recognition, control, recording and playback operations may not be possible on some devices. Materials that can be recorded with the i. LINK Only digital programs can be recorded by i. LINK devices connected to this TV using the i. LINK. i. LINK recording is not compatible with analog broadcasts or external input signals (INPUT terminals 1 through 5). Connecting two or more i. LINK devices Up to 16 i. LINK devices can be connected using a daisy-chain connection with i. LINK cables. When 3 or more i. LINK devices are connected, branch connection can be used. With branch connections, up to 62 i. LINK devices can be connected. Cautions regarding i. LINK connection · Please use S400 type i. LINK cables. · Some i. LINK devices may not relay data if their power is off. In this case the device should be connected at the end of any series of connections. · This TV can relay data during power off, by selecting "Active" in the "Standby Mode" option in "i. LINK Setup". (See page 35. ) · Please do NOT use a loop connection as shown in the diagram. i. LINK connection NOTE · Please make sure the shapes of the terminal and the plug match, and insert the plug into the terminal straight, not on an angle. · Use either one of the terminals. These two terminals do not differ in quality or function. i. LINK device Only an i. LINK cable is needed to connect the TV to i. LINK devices. (VIDEO, S-VIDEO, and AUDIO cables do not need to be connected. ) · When any devices are playing or recording via i. LINK, do not turn off the power of, or disconnect the cable from any of the i. LINK devices, even if one or more of the i. LINK devices are not in use. Doing so may affect the picture and the sound from an i. LINK device in use. · If devices such as DVD recorders, non-HDV camcorders, computers and computer peripheral devices that are not compatible with this TV are connected to the TV using i. LINK, other i. LINK connections may be disrupted. · If device recognition, control, recording or play back, on an i. LINK connected device does not function correctly, correct operation may be restored by disconnecting and reconnecting the i. LINK cable. · When connecting multiple i. LINK devices, depending on the specifications and the interoperability of the connected devices, their operation may not be stable. In that case, disconnecting all devices not in use and changing the method of connection may result in stable operation. 33 Using external equipment Setting the input source (i. LINK) If you want to receive an analog signal from the i. LINK device, you need to also use INPUT 1, INPUT 2, INPUT 3, INPUT 4 or INPUT 5 to connect the i. LINK device to the TV and follow the steps below to designate the INPUT you are using. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Optional accessory The listed optional accessory is available for the Liquid Crystal Television. Please purchase it at your nearest shop. · Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. Part name Wall mount bracket Part number AN-37AG2 73 Dimensional drawings Unit: inch/(mm) 2627/64 (671) 36 /8 (930) 5 43/32 (104) 413/16 (122) 3225/64 (822. 6) 1817/64 (463. 8) 2845/64 (729) 269/64 (664) 231/32 (585) 231/64 (63) 179/32 (439) 121/16 (306) 77/8 (200) 74 77/8 (200) 361/64 (100) CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Setup". Press a/b to select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", and the Secret number input screen displays. MENU [Setup . . . [. . . ]