User manual SHARP AR-122

[. . . ] This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. Follow the cautions below when using this unit. Exercise care in this area when removing misfed paper. [. . . ] Do not touch the photoconductive drum (green portion) when removing the misfed paper. Do not remove the misfed paper from above the fusing unit. Unfixed toner on the paper may stain the paper transport area, resulting in smudges on copies. Raise the fusing unit release lever and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up. Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up. When the developer replacement required ( ) indicator lights up, the developer should be replaced. dEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN AUTORIZED SHARP SERVICE TECHNICIAN. Contact your service centre as soon as possible. When maintenance ( ) indicator lights up, service by an authorised SHARP service technician is required. Contact your service centre as soon as possible. Information on how to use the online manual is also provided. Some of the names that appear in these illustrations may differ slightly from the screens that appear in other operating systems. The following term is used in this chapter. Means the supplied CD-ROM with the SHARP Personal MFP series software. Permits you to operate scanning function of this unit with TWAIN-compliant and WIA-compliant application. Enables you to use the printer function of this unit with your computer. An integrated software environment that makes it easy to manage document and image files and launch applications. The scanning feature is only available with Windows 98/Me/2000/XP using a USB connection. 0 or using a parallel connection, only printing is available. Check the following hardware and software requirements in order to install the software. [. . . ] You agree and certify that neither the Software nor any other technical data received from SHARP, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by you outside of the United States, you agree that you will not re-export the Software nor any other technical data received from SHARP, nor the direct product thereof, except as permitted by the laws and regulations of the United States and the laws and the regulation of the jurisdiction in which you obtained the Software. If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. The Government agrees: (i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as "Commercial Computer Software" and the Government is acquiring only "restricted rights" in the Software and its documentation as that term is defined in Clause 252. [. . . ]