User manual SHARP AR-335 SECTION 2

[. . . ] CHAPTER 4 SUPPLIES This chapter describes the supplies for this copier such as paper and toner. CHAPTER4 Page q PAPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Types and sizes of copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loading copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ADDING TONER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] RADF exit roller cover (AR-285/AR-335) Open to remove misfed originals. RADF feeding roller cover (AR-285/AR-335) Open to remove misfed originals. Transport lever Turn to open the transport section. Photoconductive drum Copy images are formed on the photoconductive drum. Corona unit The unit is used to charge the photoconductive drum. Roller rotating knobs Turn to remove misfed paper. Paper guide Push down to remove misfed paper. GENERAL INFORMATION Part names and functions Accessories Operation manual . 1 Toner collecting containers (including 1 pre-installed at the factory) . 3 6-3 PART NAMES AND FUNCTIONS Operation Panel 1 4 PRINT DATA ON LINE 2 5 8 0 3 6 INTERRUPT CLEAR ALL CA START 7 COPY AUDIT CLEAR 9 PROGRAM CLEAR C P The key and indicators are not used for the copier features. DATA ON LINE 1 4 2 5 8 0 3 CA 6 PRINT 7 COPY ACC. #-C 9 C P LCD touch panel Displays information to assist the operator. Various operation keys are included in the touch panel depending on the particular screen being displayed. 10-key pad Used to set the copy quantity. CHAPTER6 GENERAL INFORMATION Part names and functions START ( ) key and indicator Copying is possible when the indicator is on. SPECIAL MODES key (p. 3-1) Press to select special functions. Message display Messages are displayed regarding copier status and operation. Paper size display The sizes of loaded copy paper are displayed and the selected paper feed location is highlighted. Copy quantity display Displays the specified number of copies. Original size display The original paper size is displayed. 1-7) Press for operation guidance on use of various features of this copier. Press for guidance when a misfeed occurs, when adding toner, or when used toner must be disposed of. CLEAR ALL ( CA ) key Clears all selected settings and returns the copier to the initial settings. COPY key Press during standby to display the total output count. AUDIT CLEAR ( ) key Closes an open account. 2-18) Press to select the job memory mode. CLEAR ( C ) key Press to clear the copy quantity display, or press during a copy run to terminate copying. [. . . ] Offset Paper size for stapling 30 mm (1. 2 inch) A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17") In some regions, 216 mm x 330 mm (8-1/2" x 13") size paper can be used in place of B4 (8-1/2" x 14"). Stapling capacity 50 sheets (80 g/m2 (21 lbs. )) (25 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") paper) Power supply Weight Dimensions Drawn from the copier Approx. 50 kg (111 lbs. ) 590 mm (W) x 560 mm (D) x 998 mm (H) (23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H)) OPTIONAL EQUIPMENT Finisher (AR-FN1) Specifications are subject to change for improvement without notice. CHAPTER7 7-19 LARGE CAPACITY TRAY (AR-LC1) The large capacity tray provides the added convenience of having 3, 000 additional sheets of A4 (8-1/2" x 11") paper available. NOTE: To install the large capacity tray, an optional stand/500-sheet paper drawer (AR-DE1) or an equivalent stand must be installed. PART NAMES Paper tray control button OPTIONAL EQUIPMENT Large capacity tray (AR-LC1) Specifications Paper size Paper weight Paper capacity Weight Dimensions A4 (8-1/2" x 11") 56 to 105 g/m2 (15 lbs. 32 kg (70. 6 lbs. ) 330 mm (W) x 540 mm (D) x 583 mm (H) (13" (W) x 21-17/64" (D) x 22-61/64" (H)) CHAPTER7 Specifications are subject to change for improvement without notice. 7-20 LARGE CAPACITY TRAY (AR-LC1) Loading copy paper The large capacity tray will automatically lower when the tray runs out of paper. 1 2 3 Press the paper tray control button on the large capacity tray. q The button lamp will blink while the feed table is lowering and will go out when the tray is ready to be opened. When the button lamp goes out, pull the paper tray out. q Do not pull the paper tray out before the button lamp goes out. Only use paper within the Sharp specification and follow the paper manufacturer's instructions regarding fanning and loading the paper. OPTIONAL EQUIPMENT Large capacity tray (AR-LC1) Maximum height line 4 Load the paper onto the feed table. q Be sure to load paper appropriate for the large capacity tray. [. . . ]