User manual SHARP AR-336 SECTION 2

[. . . ] CHAPTER 3 SPECIAL FUNCTIONS This chapter describes the special copying functions including various image editing functions which have been made possible by digital image processing technology. Page XY ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 MARGIN SHIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 ERASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] On the AR-281, this selection cannot be performed. q READY TO COPY. OK PAMPHLET COPY CANCEL OK ORIGINAL 1-SIDED LEFT BINDING 2-SIDED RIGHT BINDING 5 Select the binding position. q Select "LEFT BINDING" or "RIGHT BINDING" on the touch panel. READY TO COPY. OK PAMPHLET COPY CANCEL OK ORIGINAL 1-SIDED LEFT BINDING 2-SIDED RIGHT BINDING 6 Press the upper "OK" key. 3-18 PAMPHLET COPY AUT O URE A4 PAPER SELECT COP 7 Check the copy paper selection. q If the AUTO IMAGE function is selected, reduction or enlargement and image rotation will be automatically performed as required. The AUTO IMAGE function is automatically selected when the PAMPHLET COPY function is selected. In some regions, the AUTO PAPER SELECT function is automatically selected in place of the AUTO IMAGE function. CHAPTER3 q q 1 4 7 AUDIT CLEAR 2 5 8 0 3 6 INTERRUPT 8 Enter the desired number of copies. SPECIAL FUNCTIONS Pamphlet copy 9 PROGRAM CLEAR C P CLEAR ALL INTERRUPT CA START CLEAR 9 Press the START ( q ) key. If the document feeder is used, copying will start after all originals are scanned. If the document glass is used, proceed to the next step. q C PLACE NEXT ORIGINAL. READ-END AUTO EXPOSURE 10 A4 PAPER SELECT AUTO IMAGE 70% Replace the finished original with the next original after the START ( ) key indicator lights up, and then press the START ( ) key. Repeat this step until all originals have been scanned. Then, press the "READ-END" key on the touch panel. q q Copying will start at this time. Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets of originals larger than A4 (8-1/2" x 11") can be scanned. If originals of different sizes are used, the copy paper size will be determined based on the original that is scanned first. If originals larger than the first original are used, a portion of the images may not be copied. You can make a pamphlet by folding the copies in two and stapling them. To cancel the PAMPHLET COPY function, select the PAMPHLET COPY function again and press the "CANCEL" key. q q q 3-19 IMAGE EDITING FUNCTIONS The image editing functions include the following functions. q Centring: Shifts the image to the centre of copy paper when the original and the copy paper are of different sizes. q Repeat copy: Produces repeated copies on a single sheet of copy paper. q B/W reverse: Reverses the black and white areas. q Binding change: Rotates the image of originals for the second side in the 1-sided to 2-sided copy mode. These functions are selected by pressing the "IMAGE EDIT" key on the SPECIAL MODES screen and pressing the key of each function. CENTRING When the original and copy paper are of different sizes, CENTRING is used to shift the image as a whole to the centre of the copy paper. The image will shift only in the left to right direction, not in the top to bottom direction. q This function will not work when non-standard size originals or copy paper are used. [. . . ] READ-END Replace the finished original with the next original after the START ( ) key indicator lights up, and then press the START ( ) key. Repeat this step until all originals have been scanned. Then, press the "READ-END" key on the touch panel. q q AUTO EXPOSURE AUTO A4 PAPER SELECT 100% COPY RATIO q Copying will start at this time. Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets of originals larger than A4 (8-1/2" x 11") can be scanned. [. . . ]