User manual SHARP AR-M201

[. . . ] AR-M201 Online Manual Start Click this "Start" button. Introduction This manual describes the printer and scanner functions of the AR-M201 digital multifunctional system. Note For information on the following topics, please refer to the Operation Manual for the digital multifunctional system. · Basic machine procedures (adding paper, replacing the toner cartridge, removing misfeeds, using peripheral devices) · Copier functions · Scanning from the operation panel of the machine · Specifications Where "AR-XXXX" appears in this manual, please substitute the name of your model for "XXXX". This manual refers to the Reversing Single Pass Feeder as the "RSPF". The screen images and procedures that appear in this manual are mainly for Windows XP. [. . . ] If you placed the original in the RSPF, select "Document Feeder" for the "Paper source" and specify the original size in "Page size". (part 2) Note If you select "Document Feeder" for the "Paper source" and click the "Preview" button, the top original in the RSPF is previewed. The previewed original is sent to the original exit area, so you will need to return it to the RSPF before starting the scanning job. To view Help for a setting, click the button in the upper right-hand corner of the window and then click the setting. 4 Click the "Scan" button. Scanning begins and the image is acquired into Paint. Use "Save" in your application to specify a file name and folder for the scanned image, and save the image. To cancel a scanning job after clicking the "Scan" button, click the "Cancel" button. CONTENTS INDEX 26 3 1 2 3 SCAN Scanning from the "Scanner and Camera Wizard" (Windows XP) Place the original that you wish to scan on the document glass/RSPF. (part 1) The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner and Camera Wizard" lets you scan an image without using a WIA-compliant application. 4 Click the "Next" button. For information on setting an original for scanning, refer to "NORMAL COPYING" in the Operation Manual. Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". Click the "SHARP AR-XXXX" icon and then click "Get pictures" in "Imaging Tasks". The "Scanner and Camera Wizard" will appear. CONTENTS INDEX 27 3 5 SCAN Scanning from the "Scanner and Camera Wizard" (Windows XP) Select the "Picture type" and "Paper source", and click the "Next" button. If you placed the original on the document glass, select "Flatbed" for the "Paper source". If you placed the original in the RSPF, select "Document Feeder" for the "Paper source" and specify the original size in "Page size". You can click the "Preview" button to display the preview image. (part 2) Note If you select "Document Feeder" for the "Paper source" and click the "Preview" button, the top original in the RSPF is previewed. The previewed original is sent to the original exit area, so you will need to return it to the RSPF before starting the scanning job. To adjust the resolution, picture type, brightness and contrast settings, click the "Custom settings" button. 6 Specify a group name, format and folder for saving the image, and then click the "Next" button. JPG, BMP, TIF or PNG can be selected for the format. To begin scanning, click the "Next" button. CONTENTS INDEX 28 3 7 SCAN Scanning from the "Scanner and Camera Wizard" (Windows XP) When scanning ends, the following screen will appear. Select the next task that you wish to perform, and then click the "Next" button. If you are ready to end the session, click "Nothing. I'm finished working with these pictures". (part 3) 8 Click the "Finish" button. The "Scanner and Camera Wizard" closes and the scanned image is saved in the specified folder. CONTENTS INDEX 29 3 SCAN Outline of Button Manager Button Manager is a software utility that allows you to use the scanner function at the machine. Button Manager allows you to configure six sets of scanning settings as a scan menu on the machine. To view Help for a setting, click the button in the upper right-hand corner of the window and then click the setting. To begin scanning using the machine's operation panel, settings must be established in the Control Panel after Button Manager is installed. For information on installing Button Manager and establishing the Control Panel settings, see "SETTING UP BUTTON MANAGER" in the Operation Manual. For information on scanning using the machine's operation panel, see "USING THE SCANNER MODE" in the Operation Manual. 1 Tab Some applications Note Click to set scan menu may limit your choice 1 options. 5 "Menu Name" button 2 "Application Selection" area Set the menu names that 3 Select the start-up appear in the machine display. [. . . ] 41 Help Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 "Preview" button Settings "Auto Scan Area Adjustment" Print Status Window . . . . . . . 14 Scanner and Camera Button Manager . . . . . . . . . . . . . . 31 button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]