User manual SHARP AR-M236/M276

[. . . ] MODEL AR-M236 AR-M276 DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL (for copier) Page · BEFORE USING THE MACHINE · COPY FUNCTIONS · CONVENIENT COPY FUNCTIONS · USER SETTINGS · TROUBLESHOOTING AND MAINTENANCE · PERIPHERAL DEVICES AND SUPPLIES · APPENDIX 8 21 35 50 56 75 79 With the RSPF installed Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copying by national law. Other items may be prohibited by local law. G Money G Checks G Stamps G Passports G Bonds G Stocks G Bank drafts G Driver's licenses In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". [. . . ] 74 56 DISPLAY MESSAGES If one of the following messages appears in the display, take prompt action as instructed by the message. 2-SIDED COPIES CANNOT BE MADE ON THIS PAPER TYPE. COVER SHEETS MUST BE THE SAME SIZE AS THE COPY PAPER USED. PLEASE CHECK THE PAPER SIZE OF TRAY <***>. PLEASE REMOVE PAPER FROM THE STAPLER COMPILER. PRESS [START] TO BEGIN COPYING OR [CA] TO CANCEL. Cause and solution Auditing mode is enabled. Remove the misfeed as explained in "MISFEED REMOVAL". This appears when you attempt to make two-sided copies on special paper that cannot be used for two-sided copying. Cancel two-sided copying or change the paper. (<*> indicates the tray that is full. ) The indicated cover is open. (<**> indicates the cover that is open. ) When copying from the bypass tray, be sure to pull out the bypass tray extension. When adding a cover, load paper in the bypass tray that is the same size as the paper in the tray selected for copying. The toner cartridge must be replaced soon. Make sure that the toner cartridge is installed correctly. The RSPF has been disabled in the key operator programs. This appears when a tray is selected that has been prohibited in "TRAY SETTINGS" in the custom settings. The tray's paper size setting is different from the actual paper size. Replace the staple cartridge as explained in "STAPLE CARTRIDGE REPLACEMENT". The memory becomes full while scanning originals. Press the [START] key ( ) to copy only the originals that have been scanned, or press the [CLEAR ALL] key ( ) to cancel the job. Page 55 63 27 18 48 71 71 71 22 52 17 72 69 - 5 57 TROUBLESHOOTING AND MAINTENANCE Message SELECTED PAPER TRAY IS OUT OF SERVICE. [. . . ] 69 - RSPF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - Upper exit area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 - Upper paper tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Staple cartridge, replacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]