User manual SHARP AR-M351N/M351U/M451N/M451U

[. . . ] MODEL AR-M351U AR-M451U AR-M351N AR-M451N LASER PRINTER OPERATION MANUAL (for general information and copier operation) Page PART 1: GENERAL INFORMATION BEFORE USING THE PRODUCT MANAGING THE MACHINE PERIPHERAL DEVICES PART 2: COPIER OPERATION 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 MAKING COPIES CONVENIENT COPY FUNCTIONS MACHINE MAINTENANCE (FOR COPYING) DOCUMENT FILING FUNCTION SPECIFICATIONS Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections. Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual (for general information and copier operation)" and operation manuals for any optional equipment which has been installed. In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. [. . . ] If you performed steps 4 to 6 to insert cover paper, divided stapling is not possible. You can either continue pamphlet copying without stapling, or cancel the job. To cancel the pamphlet copy function, touch the [CANCEL] key on the pamphlet copy setting screen (step 7). 5 7 Touch the [OK] key. CANCEL OK G RIGHT BINDING COVER SETTING 8 Touch the [OK] key. OK CANCEL OK Return to the main screen of copy mode. LEFT BINDING RIGHT BINDING COVER SETTING 5-7 SPECIAL MODES Job build Use job build mode when you need to copy more originals than can be placed in the document feeder at once. The maximum number of originals that can be placed in the document feeder at once is 50 sheets (30 sheets when the size is B4 or larger; for more information see "Acceptable originals" on page 4-2). This function lets you divide and scan the originals in sets. This function allows the original pages to be scanned in sets. [Example] Copying 100 pages of A4 originals Originals 1 100 original pages 1 A:50 sheets 51 B:50 sheets *Divide the originals into sets of 50 pages each. Scan the originals starting from the first page of set A. Scan set B next, taking care to keep the correct page order. To display the special modes screen. . . See "General procedure for using special functions" on page 5-2. that is 4 Make sureselect the desired paper size or selected, the number of copies other copy settings, and press the [START] key. Scanning of originals will start. After scanning of the first set of originals (A in the example above) is completed, remove the scanned originals, place the next set of originals (set B in the example) and press the [START] key. Repeat this operation until all sets of originals have been scanned. 1 Touch the [JOB BUILD] key on the special modes screen. ES DUAL COP TANDE COPY N SHIFT ERASE LET COPY JOB BUILD The [JOB BUILD] key will be highlighted to indicate that the function is turned on, and the job build icon ( ) will appear in the upper left of the screen. 2 Touch the [OK] key on the special modes screen. OK 5 Touch the [READ-END] key. PLACE NEXT ORIGINAL. READ-END Return to the main screen of copy mode. 1/3 RASE DUAL PAGE COPY TANDEM COPY JOB BUILD first 3 Place the feederset of originals document tray. (page 4-3) in the To cancel the job build function, touch the [JOB BUILD] key on the special modes screen (step 1). The highlighted display will be cancelled. 5-8 SPECIAL MODES Tandem copy Two machines connected to the same network can be used to run a large copy job in parallel. By dividing the job in half, approximately half the time is required to complete the job. To use this function, two machines must be connected to your network as network printers. Even if more machines are connected to the network, this function can only be used to have one other machine share a job. Server machine and client machine GIn the following explanations, the machine on which the copy job is initially set up and tandem copy selected is called the server machine. The other machine that is asked to share the job is called the client machine. GTo use the tandem copy function, the tandem settings must be configured in the key operator programs. (See page 5-7 of the "Operation manual (for printer)") GWhen configuring the tandem settings in the server machine, the IP address of the client machine must be entered. [. . . ] 3-13 -General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23 to 2-25 -Saddle stitch finisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 Types and sizes of paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 to 2-4 Types and sizes of paper that can be used . . . . . . . . . . . [. . . ]