User manual SHARP AR-M550N

[. . . ] MODEL AR-M550U AR-M620U AR-M700U AR-M550N AR-M620N AR-M700N DIGITAL LASER COPIER/PRINTER DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL (for general information and copier operation) Page PART 1: GENERAL INFORMATION ?PERIPHERAL DEVICES PART 2: COPIER OPERATION 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 ?SPECIFICATIONS Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections. [. . . ] The erase width is approximately 1/2" (10 mm) in it's initial setting. NOTE The initial setting for the erasure width can be changed in the key operator programs to any value from 0 to 1" (0 to 20 mm). (Page 14 of the Key operator's guide) Original Copy EDGE ERASE Eliminates shadow lines around the edges of copies caused when heavy paper or a book is used as an original. CENTER ERASE Eliminates shadow lines produced by the bindings of bound documents. EDGE + CENTER ERASE Eliminates shadow lines around the edges of copies and eliminates the shadow at the center of copies. To display the special modes screen. . . See "General procedure for using special functions" on page 5-2. 3 Adjust the amount of erase and touch the [OK] key. CANCEL EDGE OK 1 MODES Touch the [ERASE] key on the special modes screen. DUAL C TAN C 1/2 (0 1) inch Use the and keys to set the erase width to any value from 0" to 1" in increments of 1/8" (0 to 10 mm in 1 mm). RGIN SHIFT ERASE PHLET COPY JOB BUILD The erase setting screen will appear. The erase icon ( ) will also appear in the upper left of the screen to indicate that the function is turned on. 4 Touch the [OK] key on the special modes screen. You will return to the main screen of copy mode. About the steps that follow If an automatic document feeder is being used, see pages 4-7 through 4-10. If the document glass is being used, see pages 4-11 through 413. NOTE When erase is used, edge erase takes place at the edges of the original image. If you also use a ratio setting, the edge erase width will change according to the set ratio. To cancel the erase function, touch the [CANCEL] key on the erase setting screen (step3). 2 Select the desired erase mode. Select one of the three erase modes. The selected key will be highlighted. ERASE EDGE ERASE CENTER ERASE EDGE+CENTER ERASE 5-4 SPECIAL MODES Dual page copy The dual page copy function produces separate copies of two documents placed side by side on the document glass. This function is especially useful when copying books and other bound documents. [Example] Copying right and left pages of a book Book original Dual page copy GThe dual page copy function can be used only when copying from the document glass. The automatic document feeder cannot be used with this function. GOnly 8-1/2" x 11" (A4) paper can be used. To display the special modes screen. . . See "General procedure for using special functions" on page 5-2. 4 Ensure that 8-1/2" x 11" (A4) size paper is selected. AUTO 81/2x11 PAPER SELECT 100% If 8-1/2" x 11" (A4) size paper is not selected, touch the [PAPER SELECT] key to select 8-1/2" x 11" (A4) size paper. 1 Touch the [DUAL PAGE COPY] key on the special modes screen. OK 1/3 RASE DUAL PAGE COPY TANDEM COPY JOB BUILD The [DUAL PAGE COPY] key will be highlighted to indicate that the function is turned on, and the dual page copy icon ( ) will appear in the upper left of the screen. 2 Touch the [OK] key on the special modes screen. You will return to the main screen of copy mode. About the steps that follow For two-sided copying, follow steps 2 through 4 on page 4-13 and then follow steps 4 through 7 on page 4-12. For one-sided copying, follow steps 4 through 7 on page 4-12. NOTE To erase shadows caused by document binding, use the edge erase function (page 5-4). (Center Erase and Edge + Center Erase cannot be used in combination. ) To cancel the dual page copy function, touch the [DUAL PAGE COPY] key on the special modes screen (screen of step 1). 5 3 Place the originals on the document glass. When copying a thick book, press down lightly on the book to flatten it against the document glass. Index 81/2" x 11" A4 This page is copied first. Center line of original 81/2" x 11" (A4) 11" x 17" (A3) Place the opened original on the document glass so that the first page you wish to copy is on the right and the center of the original is aligned with the size mark. 5-5 SPECIAL MODES Pamphlet copy The pamphlet copy function is used to arrange copies in proper order for eventual center-stapling and folding into a booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet. [. . . ] 7-10 to 7-11 [SCAN TO HDD] key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 [SEARCH] key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Searching for a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13 to 7-14 8-6 INDEX Troubleshooting -Copier operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]