User manual SHARP AR-P16 C260M INSTALLATION MANUAL (PRINTER).

[. . . ] INSTALLATION GUIDE MODEL AR-C260 AR-C260M DIGITAL FULL COLOUR COPIER/PRINTER (AR-C260) DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM (AR-C260M) INSTALLATION GUIDE (for printer) Page 1 · INTRODUCTION 2 · ABOUT THE CD-ROMS 3 · SOFTWARE LICENCE · INSTALLING THE PRINTER DRIVER AND UTILITIES 5 (SOFTWARE INSTALLATION) · INSTALLING PRINTER DRIVERS USING THE 11 "ADD PRINTER WIZARD" · UNINSTALLING PRINTER DRIVERS AND PRINTER 12 UTILITIES · CONNECTING THE MACHINE TO YOUR COMPUTER 12 Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections of the "Operation manual (for general information and copier operation)". Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual (for general information and copier operation)" and operation manuals for any optional equipment which has been installed. The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sentence is not applicable in any country where the above directives are not required. ) Warning: This is a Class A product. [. . . ] Installation of the printer driver using the "Add printer wizard" Installation of the printer driver using the "Add printer wizard" is performed using basic Windows procedures. To install the printer driver by this method, see page 11. 3. About network environments There are several types of network environments. Typical environments include the following: G Windows network environment G NetWare network environment The explanations in this manual assume that your operating system is Windows and that TCP/IP protocol is used in your network environment. If you are using the machine in another type of network environment, see the online manual (Print Server Card Users Manual) in the "User Software" CD-ROM. G NetWare network environment . . . . . . . . . . . . . . . . . . . (Page 4-1) G UNIX network environment . . . . . . . . . . . . . . . . . . . . . . . . . (Page 6-1) G UNIX network environment Pages of PDF manual in the "User Software" CD-ROM. 5 INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION) Installation method 1 Use this procedure to install the software in the following environments: 1. Windows version: Windows 95/98/Windows Me Install the software as follows. G More information on installation (1) To install the following items, select "User Tools" in the "Tool Selection" screen. PCL5c Printer Driver, PCL Display Font, Printer Status Monitor (2) To install the following item, select "Administrator Tools" in the "Tool Selection" screen. Printer Administration Utility (3) In the package selection screen, select the checkboxes of the items that you wish to install. 1 Set the IP address of the machine Before installing the printer driver, set the IP address of the machine using the appropriate key operator program. For this procedure, see "Key Operator Programs" (page 6-6) in the printer operation manual (in PDF format) in the "PRINTER UTILITIES" CD-ROM. The factory default setting for the IP address is "DHCP", which means that the IP address is set automatically. If you are not using the machine in a DHCP environment, ask your network administrator for the IP address, IP net mask, and IP gateway to be used for the machine, and then program this information. 2 Using the machine in Windows 95/98/Me To use the machine as a network printer in Windows 95/98/Me, install "SC-Print2000" from the "User Software" CD-ROM. For the procedure for installing "SC-Print2000", see the "Print Server Card Users Manual" in PDF format in the "User Software" CD-ROM. More information on installation During the "SC-Print2000" installation, you must enter the IP address, IP net mask, and IP gateway to be used by the machine. Make sure you have this information at hand before you begin installation. In the IP address entry screen, you must also select the internal port name of the Print Server Card. Be sure to select "lp(AR-NC5J)" for this name. (4) In the cable selection screen, select "Network" and then click the [Next] button. This screen does not appear in Windows 95/NT 4. 0. (5) In the printer port selection screen, do not click the [Add Network Port] button. 3 Installing the software in Windows 95/98/Me Install the software as follows. 3-1 Insert the "PRINTER UTILITIES" CD-ROM that accompanied the machine into your CD-ROM drive. 3-2 Double-click [My Computer], and then double-click the CD-ROM icon. 3-4 Follow the on-screen instructions. 6 INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION) 4 Change the printer port from "LPT1" to the network port of the machine Change the printer port as follows. 4-1 Click the [Start] button, select [Settings], and then click [Printers]. [. . . ] Follow the instructions in the Plug and Play window to install the printer driver. (To connect the cable, see page 12. ) NOTES G If you are using a parallel cable, make sure that the machine and your computer are turned off before connecting the cable. G If the "Hardware Installation" screen appears, click the [Continue Anyway] button. 10 INSTALLING PRINTER DRIVERS USING THE "ADD PRINTER WIZARD" Before installation Before installing the printer drivers, check the following items. G Ensure that your computer system meets the following requirements. [. . . ]