User manual SHARP BD-HP90U

[. . . ] BD-HP90U BLU-RAY DISC/DVD PLAYER OPERATION MANUAL SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in China TINS–E825WJQZ <ORC9002-A> 10P08-CH-NG The Spanish Quick Guide is included at the end of this operation manual. ) OPERATION MANUAL ENGLISH For future reference, record the model and serial number (located on the rear of the product) in the space provided. : Introduction SAFETY INFORMATION This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks. This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this unit. [. . . ] ) NOTE • When you play a program recorded in stereo or monaural, and if you are listening to the Bitstream sound via the digital output jack, you cannot select the audio channel. set the digital audio output setting to “PCM” (page 40). € Settings for audio can also be changed in the Function Control screen (Page 37). € The operation of audio differs according to each disc. You may need to refer to the operation manual of the disc. € The display for audio information automatically disappears after 5 seconds. nOTE • The displayed items vary depending on the disc. € If you access the Function Control screen during playback of a BD/DVD video, it may be impossible to operate the BD/DVD video playback. In cases like this, close the Function Control screen. € The operation of angles differs according to each disc. You may need to refer to the operation manual of the disc. € The display for angle information automatically disappears after 5 seconds. Displaying the Angle Mark BD VIDEO DVD VIDEO Switching Subtitles BD VIDEO DVD VIDEO If subtitles are provided in multiple languages, you can switch between them. € The display indicates the subtitle number currently being played back, and the subtitles appear. Each time SUBTITLE is pressed, the subtitles change. You can change settings so that Angle Mark appears in the right bottom part of the screen when multiple angles are recorded. The settings can be changed in “Settings” – “Playback Setting” – “Angle Mark Display” (Page 41). NOTE • Settings for subtitles can also be changed in the Function Control screen (Page 37). € The operation of subtitles differs according to each disc. You may need to refer to the operation manual of the disc. € The display for subtitle information automatically disappears after 5 seconds. 36 Settings During Playback Function Control BD VIDEO BD-R BD-RE DVD-RW Function control operation procedure DVD VIDEO AUDIO CD DVD-R This allows you to adjust various settings at once, like subtitles, angle settings and the title selection for Direct Playback. [. . . ] The license notices for these software components are shown below. OpenSSL License This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. BSD License This product includes software developed by the University of California, Berkeley and its contributors. Xii CONSUMER LIMITED WARRANTY (Valid for warranty service in the U. [. . . ]