User manual SHARP CD-BA1200H

[. . . ] When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. " This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. [. . . ] Replace it with another video CD in good condition. Function will not work in the following conditions. When repeat, random, programme, bookmark, resume, disc digest, track digest or time search play has been selected and playback begins. When track numbers are selected using the direct search, the / (NEXT ) or / ( PREV. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position. Video CDs can be placed in any open position in the disc tray. Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions. Total number of tracks on the video CD whose number is flashing Total playing time of the video CD whose number is flashing To select the video CD you want to listen to first, press the DISC SKIP button. Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically start playback. When the last track on the third disc has finished playing, the unit will stop automatically. Time search mode will be cancelled automatically if the desired time is not entered within 10 seconds. The time search function will not work during P. Mode before using this function on a video CD with P . This operation is not accepted by still pictures (menu display, photo, etc. After performing repeat or random play, be sure to press the Otherwise, the disc(s) will play continuously. When there are more than 9 tracks on the video CD: Each press of the / (NEXT ) button will display the next 9 tracks. This function is not available with an audio CD. You can look at the sections and select the scene you want to start watching from. This function is convenient when you want to start from the middle of an undivided track, for example, a movie. The track being played back will be divided into 9 sections and playback will be paused. You can play back a desired track by selecting one from the 9 displayed tracks on the screen. [. . . ] The remaining sleep time is displayed for about 5 seconds. If you select CD/VIDEO CD or TAPE, the unit will enter the stand-by mode after the playback. If you select TUNER, it will enter the stand-by mode one hour after the timer playback starts. Once the sleep time is set, it will remain unchanged until a new time is entered. [. . . ]