User manual SHARP CD-BA1500H

[. . . ] z This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. Z To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. [. . . ] You can select the extra bass and pre-programmed equaliser modes with the same button on the main unit. To change to a different mode, press the EQUALIZER/X-BASS/ DEMO button repeatedly until the desired sound mode appears. The first time the unit is plugged in, the unit will enter the demonstration mode. When the unit is in the power stand-by mode (demonstration mode), press the EQUALIZER/X-BASS/DEMO button. When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. When the unit is in the power stand-by mode, press the EQUALIZER/X-BASS/DEMO button again. When the power is on, the EQUALIZER/X-BASS/DEMO button can be used to select the extra bass mode. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears. , , To turn the power on Press the ON/STAND-BY button to turn the power on. Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. Press the ON/STAND-BY button to turn the power on. If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. Z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. Z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. Z You can locate the desired portion on a single disc only. Z When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. , , Starting playback with a desired track You can play a disc starting with the desired track. Repeat or random play The tracks on the disc(s) can be played in random order automatically. When the end of last track of the disc selected is reached, the next disc will be automatically started. Z When the DISC SKIP button is pressed during playback, the next disc will begin automatically. [. . . ] If you select TUNER, it will enter the stand-by mode one hour after the timer playback starts. The remaining sleep time is displayed for about 5 seconds. Once the sleep time is set, it will remain unchanged until a new time is entered. When the recording tape reaches its end, the timer recording will end, and the unit will enter the stand-by mode. [. . . ]