User manual SHARP CD-BA250

[. . . ] When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. " This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. [. . . ] When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position. Video CDs can be placed in any open position in the disc tray. Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions. You can choose up to 32 selections for playback in the order you like. You can also select a track by pressing the (NEXT ) button. Press the MEMORY/SET (MEMORY) button to save the track number. Playback order When the track is memorised, "MEMORY" will appear. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. When all the tracks are cleared, "MEMORY" will disappear. The new tracks will be stored after the last track of the original programme. After performing repeat or random play, be sure to press the Otherwise, the disc(s) will play continuously. When there are more than 9 tracks on the video CD: Each press of the / (NEXT ) button will display the next 9 tracks. This function is not available with an audio CD. You can look at the sections and select the scene you want to start watching from. This function is convenient when you want to start from the middle of an undivided track, for example, a movie. The track being played back will be divided into 9 sections and playback will be paused. You can play back a desired track by selecting one from the 9 displayed tracks on the screen. Press the direct search buttons on the remote control to select the scene you want to watch. When the last track on the third disc has finished playing, the unit will stop automatically. The track digest function works only during playback. This operation is not accepted by a short time track (less than one minute), still pictures (menu display, photo, etc. [. . . ] The remaining sleep time is displayed for about 5 seconds. If you select CD/VIDEO CD or TAPE, the unit will enter the stand-by mode after the playback. If you select TUNER, it will enter the stand-by mode one hour after the timer playback starts. Once the sleep time is set, it will remain unchanged until a new time is entered. [. . . ]