User manual SHARP CD-BA250/2600H

[. . . ] (0:00 - 23:59) The 12-hour display will appear. (AM 12:00 - PM 11:59) The 12-hour display will appear. (AM 0:00 - PM 11:59) To readjust the clock: Perform "Setting the Clock" from the beginning. If the time display is flashing, step 3 (for selecting the 24-hour or 12-hour display) will be skipped. To change the 24-hour or 12-hour display: 1 2 Clear all the programmed contents. [. . . ] 3 If neither step 1 nor 2 restores the unit, do the following: Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the / button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. Remote Control Test of the remote control Face the remote control directly to the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Now, you can enjoy the music. Remote sensor Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. 0. 2 m - 6 m (8" - 20') Before transporting the unit 1 2 3 4 5 Press the ON/STAND-BY button to turn the power on. Press the OPEN/CLOSE button to open the disc tray. Press the OPEN/CLOSE button to close the disc tray. Make sure that "NO DISC" is displayed. Press the ON/STAND-BY button to enter the stand-by mode, and then unplug the AC power lead from the AC socket. ­7­ 1 Accessories 3 System connections Right speaker Left speaker Remote control × 1 AM loop antenna1 × FM antenna CD-BA250H/CD-BA2600H Red Black AM loop antenna FM antenna × 1 2 Batteries are not included. Battery installation of remote control 3 Replace the cover. Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). ­8­ Right speaker Wall socket (AC 230 V, 50 Hz) (For U. K. ) 1 Remove the battery cover. 2 Insert the batteries as shown. Left speaker TV RCA lead (not supplied) To the line output sockets VCR, DVD, etc. Wall socket (AC 230 V, 50 Hz) (Except for U. K. ) 4 Listening to a cassette tape (TAPE 1 or TAPE 2) 2 Press the ON/ STAND-BY button to turn the power on. Turn on your system 1 2 3 4 TAPE 1 TAPE 2 The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll. 1 Press the X-BASS/DEMO button to cancel the demonstration mode. Open the cassette door by pushing the area marked " PUSH EJECT". Load a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. Press the TAPE (1 2) button to select the cassette you want to listen to. Press the button to start playback. Listening to a CD (CDs) Press the CD button. Press the OPEN/CLOSE button to open the disc tray. 12 cm (5") 1 s 8 cm (3") 2 If trouble occurs 3 Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. Press the OPEN/CLOSE button to close the disc tray. ­9­ To select the CD you want to listen to first, press one of 1 - 3 buttons on the remote control. Press the button to start playback. 4 5 6 s When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Set the unit to the stand-by mode and turn the power on again. If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on. If neither step 1 nor 2 restores the unit, do the following: Press the ON/STAND-BY button to enter the power stand-by mode. [. . . ] Music from the so-called "golden age" of popular music. Music which has its roots in the musical culture of a particular nation, usually played on acoustic instruments. The narrative or story may be based on historical events or people. Programme concerned with factual matters, presented in an investigative style. [. . . ]