User manual SHARP CD-BK260V

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Please confirm that the following accessories are included. [. . . ] Each time a bookmarked scene is displayed, you can hear the first several seconds of the scene. After displaying every scene, this unit will enter the pause mode automatically. Press the direct search buttons on the remote control to select the scene you want to play back. When the third disc has finished, the unit will stop automatically. 3 Press the BOOKMARK button on the remote control when the desired scene is displayed. This function works only with video CDs. Even if the unit is set to the stand-by mode or the function is changed from CD/ VIDEO CD (CD) to some other function, the marks will not be erased. Marks created on one of the discs 1 - 3 will be erased when creating marks on other discs. The bookmark function will not work during P . Mode before using this function on a video CD with P . This function is invalid with still pictures (menu display, photo, etc. Every marked scene will be erased automatically when the programme is memorised. If more than 9 bookmarks are created, bookmarks will be erased in the order they were created. This function is to restart playback from the point where it has stopped. During the stop mode, hold down the ton for more than 1 second. You can check the operation of the main unit by the on-screen display. Resume play cannot be activated when the function is changed from CD/VIDEO CD (CD) to another or the unit is set to the power stand-by mode. Resume play cannot be performed whilst opening the disc tray or after changing the disc. Usually this unit detects the video CD and plays back pictures and sounds. In case this unit fails to judge it correctly, you can play back the video CD manually. Each time the OSD (OSD ON/OFF) button is pressed during playback or in the stop mode, the display will change as follows: This setting will be cancelled when you change the discs. Whilst in the "VCD ON" state, you cannot play back audio CDs. [. . . ] Is the unit located near excessive vibrations?Symptom Possible cause " The remote control does not oper- " Is the AC power lead of the unit plugged ate. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly , it may malfunction. [. . . ]