User manual SHARP CD-DH950P

[. . . ] ENGLISH MODEL CD-DH950P MINI COMPONENT SYSTEM OPERATION MANUAL CD-DH950P Mini Component System consisting of CD-DH950P (main unit) and CP-DH950P (speaker system). ON/STAND-BY DISPLAY (TV OUT) MENU DISPLAY TUNER(BAND) AUDIO IN CD TAPE USB X-BASS VOL TUNING BASS/TREBLE FOLDER PRESET ENTER PRESET PLAY MODE MEMORY CLOCK/TIMER DEMO DIMMER CLEAR SLEEP MUTE iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc. , registered in the U. S. and other countries. Accessories Please confirm that only the following accessories are included. Remote control x 1 (RRMCGA255AWSA) AM loop antenna x 1 (QANTL0005AWZZ) FM antenna x 1 (92LFANT1535A) iPhone® adaptor x 3 (GCOVAA238AWSA - No 12) (GCOVAA239AWSA - No 15) (GCOVAA294AWSA - No 19) Special Note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing. com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. [. . . ] To repeat all tracks on up to 5 discs: (CD Press the PLAY MODE button 3 times. To repeat desired tracks: Perform steps 1 - 6 in “Programmed play” section on page 8 and then press the PLAY MODE button. To cancel repeat play: ” disappear. Press the PLAY MODE button again until “ 2 3 4 5 6 To cancel the programmed play mode: (CD ) During programmed stop mode, press the button. The display will show “MEM CLEAR” and all the programmed contents will be cleared. Adding tracks to the program: If a program has been previously stored, the “MEMORY” indicator will be displayed. Notes: When a disc is ejected, the program is automatically canceled. If you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will be cleared. During the program operation, random play is not possible. Do not mix CD with MP3/WMA discs during programming. Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the PLAY MODE button for 2 seconds on the remote (CD ) button. control and then press the To cancel random play: Press the PLAY MODE button. Notes: If you press the button during random play, you can move to the next track by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) Caution: After performing repeat or random play, be sure to press the (CD ) button. Otherwise, the disc(s) will play continuously. E-8 CD-DH950P_US_EN. indd 8 4/1/2011 2:06:01 PM Listening to USB mass storage device/MP3 player DISPLAY DISPLAY (TV OUT) USB ON/STAND-BY MENU DISPLAY CD CD TUNER(BAND) TAPE AUDIO IN USB AUDIO IN TUNER (BAND) TAPE USB X-BASS TUNING AUDIO IN USB FOLDER TUNING BASS/TREBLE VOL FOLDER PLAY MODE PRESET ENTER CLOCK/TIMER PRESET MEMORY PRESET SLEEP DEMO DIMMER CLEAR ENTER PRESET MUTE USB Note: This product is not compatible with MTP and AAC file systems from USB mass storage device or MP3 player. To play back USB/MP3 player with folder mode off 1 Press the USB button on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed. or Select desired file to be played back by pressing the button. Playback will start and the file name will be displayed. Title, Artist and Album name are displayed if they are recorded in the USB memory device. [. . . ] The iPod or iPhone is not making full contact with the connector. Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program. Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc. ) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). [. . . ]