User manual SHARP CD-ES770

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-ES770 Mini Component System consisting of CD-ES770 (main unit) and CP-ES770 (speaker system). MINI COMPONENT SYSTEM MODEL CD-ES770 OPERATION MANUAL Accessories Please confirm that the following accessories are included. Remote control 1 AM loop antenna 1 (RRMCGA049AWSA) (QANTL0005AWZZ) Note: Only the above accessories are included. FM antenna 1 (92LFANT1746A) CD-ES770 SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Notes: When a disc with programmed tracks is ejected, the program is automatically canceled. Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will not be cleared. During the program operation, random play is not possible. During programmed play, the DIRECT PLAY buttons will not work. 1 While in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. 2 Press one of the 1 - 5 buttons to select the desired disc. CD Playback 3 Press the direct search buttons on the remote control to select the desired track. Selected track number You can also select a track by pressing the or button. 4 5 Press the MEMORY/SET (MEMORY) button to save the track number. Repeat steps 2 - 4 for other tracks. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button. Press the / button to start playback. 6 7 20 Listening to the radio Tuning CD-ES770 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Notes: When radio interference occurs, auto scan tuning may stop automatically at that point. Auto scan tuning will skip weak signal stations. To stop the auto tuning, press the TUNING button again. To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. " " will appear when an FM broadcast is in stereo. If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. FM stereo mode indicator Auto power on function: When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated. / button (main unit and remote control): The unit turns on and playback of the last function starts (CD, TAPE, TUNER, GAME/VIDEO). FM stereo receiving indicator 21 Radio Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. CD-ES770 Listening to the radio (continued) Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) To recall a memorized station Press the PRESET ( or select the desired station. ) button for less than 0. 5 seconds to 1 2 Perform steps 1 - 3 in "Tuning" on page 21. Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. To scan the preset stations The stations saved in memory can be scanned automatically. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. CD-ES770 Tuner Frequency range FM: 87. 5 - 108. 0 MHz AM: 530 - 1, 720 kHz General Power source Power consumption Dimensions AC 120 V, 60 Hz 135 W Width: 10-1/4" (260 mm) Height: 13" (330 mm) Depth: 12-7/8" (326 mm) 18. 5 lbs. (8. 4 kg) Cassette deck Frequency response 50 - 14, 000 Hz (normal tape) Signal/noise ratio 55 dB (TAPE-1 playback) 50 dB (TAPE-2 recording/playback) Wow and flutter 0. 3 % (WRMS) Weight Speaker Amplifier Output power 150 watts minimum RMS per channel into 6 ohms from 100 Hz to 20 kHz, 10% total harmonic distortion Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Video output: 1Vp-p Game/Auxiliary (audio signal): 500 mV/47 k ohms Game/Video: 1Vp-p Maximum input power Rated input power Impedance Dimensions Output terminals Input terminals Weight 150 W 6 ohms Width: 10-5/8" (245 mm) Height: 13" (330 mm) Depth: 11" (279 mm) 9. 2 lbs. (4. 2 kg)/each CD player Type Signal readout 5-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup D/A converter 1-bit D/A converter Frequency response 20 - 20, 000 Hz Dynamic range 90 dB (1 kHz) 35 References Type 3-way type speaker system Super tweeter x 2 2" (5 cm) tweeter x 1 6-1/2" (16 cm) woofer x 1 300 W z CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. [. . . ]