Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP CV-2P10SC. We hope that this SHARP CV-2P10SC user guide will be useful to you.
Lastmanuals help download the user guide SHARP CV-2P10SC.
Detailed instructions for use are in the User's Guide.
[. . . ] PORTABLE TYPE ROOM AIR CONDITIONER INSTALLATION AND OPERATION MANUAL ACONDICIONADOR DE AIRE PARA HABITACIÓN TIPO PORTÁTIL MANUAL DE INSTALACIÓN Y FUNCIONAMIENTO
ENGLISH ESPAÑOL
CV-2P10SC
This product can also be used as an ion generator
Device of this mark is a trademark of Sharp Corporation. plasmacluster is a registered trademark or a trademark of Sharp Corporation. ENGLISH
Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference. [. . . ] 22 11:00:14 AM
INSTALLATION AND REMOVAL OF EXHAUST HOSE
Installation of the exhaust hose
1 Attach the window adapter to the exhaust hose. Extend one end of the exhaust hose and insert it into the window adapter, and turn it (approx. Window adapter Extend Exhaust hose
2 Attach the exhaust hose to the unit. Exhaust hose
Insert the two projections into the two holes on the unit, and firmly attach them to each other until they click. Projection Hole
and open the exhaust cover on 3 Slideadapter. Panel, and attach the winthe window dow
(Double-hung sash window) Surface of window adapter marked "TOP" should be at the top. (Sliding sash window) Surface of window adapter marked "TOP" should be on the window frame side. Exhaust cover
"TOP"
The exhaust hose should be as short as possible for operational efficiency; however, it must not be twisted or bent. 22 11:00:15 AM
Removal of the exhaust hose
1 Remove the window adapter. Pull out and remove the window adapter by pushing down two “PUSH” markings, and slide and close the exhaust cover in the window panel. "PUSH"
ENGLISH
2 Remove the exhaust hose from the unit. Lift up and remove the exhaust hose from the unit by pushing on the two projections. 22 11:00:15 AM
PRE-OPERATION CHECKS
POWER PLUG CHECK This unit uses a fused power plug. 1 2 Insert the power plug into the wall socket. 4 Press the RESET button until you hear another CLICK. The circuit breaker is activated, power is supplied, and the unit is now ready for use. TEST RESET
You will hear a CLICK if the circuit breaker is functioning correctly. CAUTION: Do not attempt to use the unit if the above procedure cannot be performed. Disconnect the power plug and call for service. 4 Press the RESET button using a thin pointed implement. (AAA(R03)) • Make sure the (+) and (-) polarities are correctly aligned. Lines will appear on the display when batteries are properly installed. [. . . ] No air will blow out if the cooling coil is frozen. Run the unit in FAN mode with the fan speed set to "HIGH" until all ice dissipates. Close the curtains or blinds to minimize solar energy heating the room. For efficient operation, make the hose as short as possible. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP CV-2P10SC
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP CV-2P10SC will begin.
