User manual SHARP DV-NC230S(B)

[. . . ] MODEL OPERATION MANUAL Please read this Operation Manual carefully before using your VCR/DVD COMBINATION. D V- N C 2 3 0 OPERATE OPEN/CLOSE PULL OPEN REW FF STOP/ EJECT OUTPUT PLAY REC TIMER (TRACKING) CH VCR DVD STOP PLAY 2 The region number for this VCR/DVD is 2. PAL ­1­ EN INFORMATION DVD FUNCTIONS VCR FUNCTIONS SETUP PREFACE DV-NC230S(B) PRECAUTIONS VCR/DVD COMBINATION PRECAUTIONS SAFETY INFORMATION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO DRIPPING OR SPLASHING, NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS. Laser Diode Properties Material: GaAs Wave length: DVD: 655 nm CD: 790 nm Emission Duration: Continuous Laser output: Max. 0. 8 mW Power Cord Protection To avoid any malfunctions of the VCR/DVD, and to protect against electric shock, fire or personal injury, please observe the following. · Hold the plug firmly when connecting or disconnecting the AC power cord. [. . . ] (OUTPUT on the front panel and VCR on the remote control will not function. ) ­ 17 ­ EN VCR FUNCTIONS · You can programme one year in advance. · You can also select the recording routine option by pressing Cursor K / L when the month digit is flashing. Those programmes can only set a recording according to the same channel at the same time. - For daily recording : Select "MO-FR" to recording from Monday through Friday. - For everyday recording : Select "MO-SU" to recording everyday. - For weekly recording : Select "W-MO" to recording every week. W-MO : every Monday) Hint · If you have not set the clock yet, CLOCK setting menu appears. If so, follow the steps outlined in the "Clock Set Up" on page 12. · If you do not press Cursor B within 5 seconds of setting an item, the input mode will move to the next step. · Press Cursor { to go back one step from the current setting during steps 3 to 7. To Check, Correct, or Cancel a Timer Programme 1. Press TIMER ON/OFF then, VCR on the remote control. Press Cursor K / L to select the programme number which you want to check. The details of the programme will appear on the TV screen. · Press Cursor s / B to go to the digit you want to change. Then, enter correct numbers by pressing Cursor K / L. · You may cancel the entire programme by pressing Cursor s while the programme number flashes. Press TIMER ON/OFF to return to the timer standby mode. When an OTR or a Timer Recording is completed. . . · If the other Timer Recordings remain as programmed, the VCR/DVD switches to the DVD mode automatically, and the TIMER indicator on the front panel lights up to indicate the VCR/DVD is in the timer standby mode. In some occasions, however, the VCR/DVD may be automatically turned off, instead of changing to the DVD mode after pressing TIMER ON/OFF. · When you use the VCR/DVD in DVD mode during an OTR or a Timer Recording, the VCR/DVD will not turn off automatically even if the end time of the OTR or Timer Recording has been past. Note (for Timer Recording) : · If there is a power failure or the VCR/DVD is unplugged for more than 1 hour, clock and all timer settings will be lost. · The TIMER indicator on the front panel flashes if there are no more Timer Recordings on standby. If you want to use the VCR function, press TIMER ON/OFF on the remote control or STOP C/EJECT A on the VCR/ DVD. Then press VCR to activate the VCR function. To avoid overlap of Timer Programming . . . · A timer programme will not work while another programme is under execution. Programme 1 Programme 2 Programme 3 9:00 10:00 11:00 · Once the VCR/DVD switches to the DVD mode, all the VCR function will be unavailable. [. . . ] "Prohibited icon" appears on the · That operation is prohibited by this VCR/DVD or the disc. screen, prohibiting an operation. Playback picture is partially noisy. INFORMATION · Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operation Manual for details on correct operations. · Playback from a desired track and random playback are not available during programmed playback. [. . . ]