User manual SHARP DV-S1H

[. . . ] DVD Video Player MODEL DV-S1H OPERATION MANUAL Please read this Operation Manual carefully before using your DVD Video Player. The region number for this DVD player is 2. 2 NTSC/PAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours(or (01) 6760648 if telephoning from Ireland). SAFETY INFORMATION This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EGRichtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. [. . . ] 3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. 4 Press Arrow ( L / K / B / s ) to select an item, and ENTER to confirm selection. 4 Press PLAY. 5 Press STOP to stop playback. Title Menu DVD NOTE: · DVDs may have a region code. Your DVD player will not play discs that have a region code different from the region code of your DVD player. 2 If a title menu is no available, symbol may appear on the TV screen. 3 Press Arrow ( L / K / B / s ) to select an item, and ENTER to confirm selection. · Playback will begin at the selected Title. Pause DVD 1 During playback, press PAUSE. · Playback will pause and sound will be muted. 2 To continue playback, press PLAY. CD ­ 12 ­ EN DVD OPERATION Step by Step playback Zoom DVD 1 During playback, press PAUSE. · Playback will pause and sound will be muted. 2 The disc goes forward by one frame each time DVD The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 2 Press ZOOM repeatedly to select the required PAUSE is pressed. 3 To exit step by step playback, press PLAY. zoom factor: x2, x4 or OFF. Resume 3 Use Arrow ( L / K / B / s ) to move the zoomed picture across the screen. DVD CD 4 To exit zoom mode, press ZOOM to OFF in the menu bar. 1 During playback, press STOP. · Resume message will appear on the TV screen. 2 Press PLAY, playback will resume from the point Track at which playback was stopped. · To cancel resume, press STOP twice. CD There are three ways to begin playback on an Audio CD at a specific Track. Fast Forward / Reverse Search DVD 1 During playback, press g or h repeatedly to Using the Numerical key pads 1 Press numerical key pad to enter the desired Track number. · Playback will start at the selected track. · For single digit tracks (1-9), press a single number (eg. · To play track 26, press +10, 2, 6 on the numerical key pad. select the required forward or reverse speed: x2, x8, x30, x60. 2 To return to normal playback, press PLAY. CD Using the DIRECT SKIP · Use g or h to select the required forward or reverse at x16 the normal playback speed. · The track search display appears. 2 Within 30 seconds, select a desired track number using numerical key pad. · Playback will start at the selected track. Slow Motion Using the SKIP H G DVD 1 During playback, press PAUSE. · Slow motion playback will begin and sound will be muted. 3 Press g repeatedly to select the required speed: 1 Press SKIP G to move to the next track. 2 Press SKIP G or H repeatedly to skip subsequent or to return of the current tracks. [. . . ] ­Re-insert the batteries with their polarities (+/­ signs) as indicated. ­To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. ­Operations may not be permitted by the disc. ­Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD player for repair. No DTS audio at analog output No sound and picture Picture freezes momentarily during playback Disc can't be played No return to start-up screen when disc is removed The player does not respond to the remote control Buttons do not work or player stops responding Player does not respond to some operating commands during playback. [. . . ]