User manual SHARP DV-SV92S(L)

[. . . ] DVD Video Player MODEL DV-SV92S(L) OPERATION MANUAL Please read this Operation Manual carefully before using your DVD Video Player. 2 The region number for this DVD Video Player is 2. SAFETY INFORMATION Note: This player can be used only where the power supply is AC 220-240 V, 50 Hz. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. AS THE LASER BEAM USED IN THIS PLAYER IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. [. . . ] · If a language that is not supported by the disc is selected, the language is automatically set to the disc's default language. Viewing from Another Angle Some DVDs may contain scenes that have been shot simultaneously from a number of different angles. For these discs, the same scenes can be viewed from each of these different angles using ANGLE. The number of recorded angles differs depending on the disc used. When "ANGLE MARK" in PREFERENCE menu is set to " is displayed on the screen during playback. "ON", " This indicates that the multi-angle scene has just started. "ANGLE" is also displayed on the player display. From that moment on, the xth of total angles is played and you can change the viewing angle until the end of the multi-angle scene. The "ANGLE MARK" item in the SETUP menu can be used to display a continuous angle mark on the screen as long as multi-angle scene is available. Press ANGLE consecutively until the preferred viewing angle is selected. NOTE: · If you press MENU, the root menu of DVD is displayed. · If you press TITLE, the menu of the current title is displayed. · MENU and TITLE do not function in Resume mode. Press /// to select the preferred item. You can also use number buttons to select a DVD menu item. The player will automatically execute the item. To enter an item number that is more than one digit, press +10 and then enter the item number. To resume playback, select an applicable item on the DVD menu. NOTE: · Some DVDs may not contain root and/or title menus. NOTE: · This function will only work on discs where different angles have been recorded. · The viewing angles are shown on the screen. · If you press ANGLE outside of a multi-angle scene on a multi-angle title, " " is displayed on the screen. It means that only one angle is currently available. - 20 - EN VIDEO CD PLAYBACK Preparations If the player has been connected to an audio system, turn it on and then turn on your TV. Press OPEN/CLOSE ( ) to open the disc tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position. For Video CDs without playback control (PBC): Play starts immediately. [. . . ] DVD has a structure consisting of two 0. 6 mm thin discs, which are adhered to each other. Since the thinner the disc, the higher the density at which the information can be recorded, a DVD has a greater capacity than a single 1. 2 mm thick disc. Playback Control (PBC) This is recorded on a Video CD (Version 2. 0). The scenes or information to be viewed (or listened to) can be selected interactively with the TV by looking at the menu shown on the TV. [. . . ]