User manual SHARP EL-1197P

[. . . ] (Tear the paper and remove it from the print mechanism by using . Turn the power off before replacing ribbon. Remove the printer cover by sliding it towards the back of the calculator. Thread the ribbon around the outside of the metal guides. [. . . ] If an ``E'' with any numerals except zero is displayed, the error may be cleared with or and the calculation can still be continued. When the integer portion of an answer exceeds 12 digits. When the integer portion of the contents of the memory exceeds 12 digits. Note: The decimal point floats during successive calculation by the use of or . If the decimal selector is set to "F" then the answer is always rounded down ( ). A maximum of 4 digits can be stored (decimal point is not counted as a digit). Calculate the dollar difference (a) and the percent change (b) between two yearly sales figures $1, 500 in one year and $1, 300 in the previous year. The rounding selector should be in the ``5/4'' position unless otherwise specified. The print/item count mode selector should be in the " " position unless If an error is made while entering a number, press or and enter the correct number. Negative values are printed with ``­'' symbol in red. EXAMPLE 2: Perform two calculations using $840 and $525, both of which already include tax. SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. aLL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. [. . . ] (e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear. (f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage. (g) Any product received without appropriate model, serial number and CSA/CUL markings. Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an Authorized Sharp Servicing Dealer. [. . . ]