User manual SHARP EL-2910R

[. . . ] This apparatus must be protected by a 3A fuse in the mains plug or distribution board. 2) 4) Install the correct color new ink roller and press it in the correct position. The calculator should be kept in areas free from extreme temperature changes, moisture, and dust. [. . . ] Do not rotate the printing mechanism manually, this may damage the printer. Always cut leading edge with scissors first. 1) Insert the leading edge of the paper roll into the opening. 1) 2) Turn the power on and feed the paper by pressing . 2) 3) Lift the attached metal paper holder up and insert the paper roll to the paper holder. 2) 3) Soulevez le support métallique pour papier et introduisez le rouleau de papier dans le support pour papier. The count is printed when the calculated result is obtained. "RATE SET": Set the key to position to enter (or change) the tax rate. There are several situations which will cause an overflow or an error condition. When this occurs, " time of the error are retained. " will be printed in black and be used to clear the calculator. When the integer portion of an answer exceeds 12 digits. When the integer portion of the contents of the memory exceeds 12 digits. PAPER FEED KEY GRAND TOTAL KEY CHANGE SIGN KEY: Changes the algebraic sign of a number (i. This unit is equipped with a key input buffer (12 row max. ), and it may give an error message if you exceed the buffer limit by pressing keys sequentially during printing. [. . . ] The voltage can be set to any one of 240, 220, 127 or 110 volts. Using the calculator with the voltage selector improperly set will cause damage to the unit. This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. [. . . ]