User manual SHARP FO-A660

[. . . ] Welcome, and thank you for choosing a Sharp fax machine!The features and specifications of your new Sharp fax are shown below. 40 numbers Initial starter roll (included with machine): 50 m (approx. 24 average pages with no voice messages recorded, or 20 minutes of voice messages (including OGMs) with no documents in memory) 14, 400 bps with automatic fallback to lower speeds. [. . . ] note: If the transmission is unsuccessful and DOCUMENT JAMMED appears in the display , remove the document as explained on page 90. (This may occur if the other fax machine doesn't respond properly when you attempt to send the document. You can store up to 40 fax or phone numbers in the machine for automatic dialling. Enter the fax or voice number by pressing the number keys. To clear a mistake, press If a pause is required between any of the digits to access a special service Several pauses can be entered in a row. Enter a name by pressing number keys for each letter as shown in the chart below. (If you do not wish to enter a name, go directly to Step 6. To enter two letters in succession that require the same key, press After entering the first letter. To enter a lower case letter, continue pressing the key for the letter until the Lower case letter appears. To enter one of the following symbols, press or })( Return to Step 2 to store another number, or press the date and time display. Note: The fax machine uses a lithium battery to keep automatic dialling numbers and other programmed information in memory when the power is turned off. Battery power is consumed primarily when the power is off. With the power kept continuously off, the life of the battery is about 5 years. If you need to make changes to a previously stored auto-dial number, or clear a number, follow these steps: If you selected EDIT, make the desired changes to the number. To move the cursor to the digit or digits you wish to Change, and then enter the new digit. The new digit will replace the old digit. If you do not wish to change the number, go directly to Step 6. To move the cursor to the letter or letters you wish to Change, and then press the appropriate number key repeatedly until the desired letter appears (see Step 5 on page 50). The new letter will replace the old letter. If you do not wish to change the name, go directly to Step 8. Until the number you wish to edit or clear appears in Return to Step 2 to edit or clear another number, or press return to the date and time display. Using an auto-dial number Once you have stored a fax or phone number, you can use it to send a fax or make a phone call. [. . . ] A document has been loaded and the fax machine is waiting for you to begin faxing or copying. This indicates that you have received messages in the answering machine. "XX" is the number of messages. Number of pages transmitted, received, or copied. [. . . ]