User manual SHARP FO-P610

[. . . ] Welcome, and thank you for choosing a Sharp fax machine!The features and specifications of your new Sharp fax are shown below. 30 numbers Initial starter roll (included with machine): 50 m (approx. 24 average pages) 9, 600 bps with automatic fallback to lower speeds. [. . . ] If you did not put the handset back in the cradle, press Your fax will automatically begin reception if you hear a soft fax tone after answering a call on your fax or an extension phone. If you use a computer fax modem to send documents on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents from the computer fax modem. Follow the steps below to change the setting. If desired, you can use a number other than 5 to activate fax reception from an extension telephone. Enter the desired number (any number from 0 to 9). The fax has been set at the factory to automatically reduce the size of received documents to fit the size of the printing paper. This ensures that data on the edges of the document are not cut off. If desired, you can turn this function off and have received documents printed at full size. If a document is too long to fit on the printing paper, the remainder will be printed on a second page. In this case, the cut-off point may occur in the middle of a line. Automatic reduction may not be possible if the received document is too Large, contains too many fine graphics or images, or is sent at high resolution. In this case, the remainder of the document will be printed on a second page. In situations where printing is not possible, such as when your fax runs out of paper, the imaging film needs replacement, or the paper jams, incoming faxes will be received to memory. When you have received a document in memory, FAX RX IN MEMORY will appear in the display, alternating with ADD PAPER & PRESS START KEY or CHECK FILM / CHECK COVER / CHECK PAPER JAM. When you add paper When documents are stored in memory, do not turn the power off. Your fax machine can also be used to make copies. Single and multiple copies (up to 99 per original) can be made, enabling your fax to double as a convenience office copier. Number of copies per original: Press the number keys to enter a number When you are ready to begin copying, press If the memory becomes full while a document is being scanned, MEMORY IS FULL and SEE MANUAL will alternately appear in the display and the document will automatically feed out. This may happen if the resolution is set to SUPER FINE, or if you selected an enlarge/reduce setting, or if you are making more than one copy per original. To avoid using memory, use STANDARD or FINE for the resolution, 100% for the enlarge/reduce setting, and make only one copy per original. When making a copy of a document that is longer than the printing paper, use the copy cut-off setting to select whether the remaining part of the document will be cut off or printed on a second page. Press 1 to set copy cut-off to YES (the remaining part of the document will not be printed), or 2 to set copy cut-off to NO (the remaining part will be printed on a second page). [. . . ] This appears if you forgot to replace the handset after using it to dial and send a fax. Replace the handset or press the STOP key to clear the message. The SPEAKER key has been pressed and the fax machine is waiting for you to dial. Operation can be continued after it cools. [. . . ]