User manual SHARP FV-DB1E

[. . . ] MODEL FV-DB1E DAB RECEIVER If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. [. . . ] When the TUNING button is pressed for 2 seconds or more, scanning will start automatically and the tuner will stop at the first receivable broadcast station. 1 Press the BAND button until "DAB" appears on the display. To receive an FM stereo transmission: Press the BAND button to display the "ST" indicator. " " will appear when an FM broadcast is in stereo. FM stereo mode indicator FM stereo receiving indicator 2 Autotune UK: Press the AUTO TUNE button for less than 1 second. If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Set the unit to the stand-by mode and turn the power on again. If the unit is not restored in the previous operation, unplug and plug in the AC adaptor from the wall socket and replace the main batteries, memory batteries and then turn the power on. Autotune Full: Hold down the AUTO TUNE button for 2 seconds or more. Selecting a station in the station list Once a DAB station is received, you can select stations in the station list. Caution: This operation will erase all data stored in memory including clock, alarm settings, tuner preset, and station list, etc. 1 2 Press the BAND button until "DAB" appears on the display. [. . . ] "Complete" appears and the memory is cleared. Caution: This operation will erase all data stored in memory including clock, alarm settings, tuner preset, and station list, etc. 3 Within 30 seconds, press the ENTER button. Maintenance Routine maintenance is required for continued optimum performance, refer to the operation manual (page 19). TINSEA026SJZZ FV_DB1E_QG. pm 2 04. 4. 12, 6:40 PM [. . . ]