User manual SHARP GF-7300H

[. . . ] Only the above accessories are included. " Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. [. . . ] One track is divided into nine frames of equal playing time. Time search mode will be cancelled automatically if the desired time is not entered within 10 seconds. The time search function will not work during P. Mode before using this function on a video CD with P . This operation is not accepted by still pictures (menu display, photo, etc. Digest function of discs and tracks will not work during P. Mode before using this function on a video CD with P . This function marks the desired scene on the video CD to play it back easily. Whilst in the stop or playback mode, hold down the BOOKMARK button on the remote control for more than 1 second. "BOOKMARK DIGEST" will appear before the marked scenes and numbers are displayed on the TV screen. Each time a bookmarked scene is displayed, you can hear the first several seconds of the scene. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. CDs can be placed on any open position on the disc tray. Be sure to place 8 cm (3") CD(s) in the middle of the disc positions. Total number of tracks on the CD whose number is flashing Total playing time of the CD whose number is flashing To select the CD you want to listen to first, press the DISC SKIP button. Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically start playback. When the last track on the third disc has finished playing, the CD player will stop automatically. When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. " To locate the beginning of a track To move to the beginning of the next track: You can skip to any track by pressing the PRESET button repeatedly until the desired track number appears. You can skip to any track by pressing the PRESET button repeatedly until the desired track number appears. If the DISC SKIP button does not allow to rotate the disc tray (you cannot remove the disc), close and open again the tray. [. . . ] " Is the unit being played without selecting video CD?" The picture quality is poor, or it is " Is the disc very dirty?" Playback stops in the middle or is not performed properly. " Playback sounds are skipped, or stopped in the middle of a track. [. . . ]