User manual SHARP GF-800H

[. . . ] We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color Television set for years to come. Please read these instructions carefully, and keep them handy for your future reference. IMPORTANT To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. Energy efficiency is becoming increasingly important to consumers both in the US and in Canada. [. . . ] Press CH UP (8) or DOWN (9) to move the " " mark to either "MODE" or "DATA". Pressing MUTE again will return the set to its previous condition. ⷠClosed Caption may malfunction (white blocks, strange characters, etc. ) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with your TV. ⷠIf any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the closed captions will disappear momentarily. ⷠWhen viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen may become dark and blank. L VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration acquired while the TV is on. ) · VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 V I EW T I ME R hours) in 30 minutes intervals. Press CH UP (8) or DOWN (9) to move the " " mark to "CH SEARCH", then press VOL (+) or (­) to access CH SEARCH screen. The tuner will search through all available channels in your area and add them into the TV's memory. CH SEARCH will stop at the current channel and will not add any higher channels. If you press VOL (+) again while in the CH SEARCH mode, autoprogram will start again, and the previously memorized channels will be lost. L Adding weak or additional channels or erasing unwanted channels from TV memory. Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the " " mark to "SET UP". Press VOL (+) or (­) to access SET UP mode, then press CH UP (8) or DOWN (9) to move the " " mark to "CH SETTING". Press VOL (+) or (­) to access CH SETTING mode, then press CH UP (8) or DOWN (9) to move the " " mark to "CH MEMORY". press VOL (+) or (­) to access CH MEMORY. Use CH UP (8) or DOWN (9) or REMOTE KEYPAD to select each desired channel to add or erase. Press VOL (+) to add a channel to the TV's memory or press VOL (­) to erase a channel from the TV's memory. [. . . ] TIPS ON IDENTIFYING YOUR CABLE CONVERTER: Be Patient: a minute or two can seem a lot longer when you're waiting for something to happen, but the code should be identified within 2 minutes. Be careful not to let the CATV converter scan more than five channels when the indicator starts to move up. If you continue holding down the DISPLAY and CH UP (8) after five channel scans, the proper remote code can be passed up, and the two minute identify cycle will have to be repeated. If a channel change does not occur on the cable converter within two minutes, read the identifying instructions again and repeat the steps. [. . . ]