User manual SHARP GX-BT3 QUICK START GUIDE

[. . . ] MODEL GX-BT3 If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support Customers without internet access may telephone 0845 880 0512 during office hours (or (01) 676 0648 if telephoning from Ireland). WIRELESS BLUETOOTH® SPEAKER SYSTEM This Quick Start Guide will help you to correctly install and operate your system. 1 Accessories E MUT ECO MOD E ON/D-BY STAN VOL LE TREB BASS ING PAIR H AUDI TOOT BLUE O IN SS X-BA ER DIMM CGA3 42AW SA RRM GX-BT3 Remote control x 1 NFC tag x 2 Velcro tape (hook type) x 2 Velcro tape (loop type) x 3 2 Power source Wall socket AC 100 - 240 V ~ 50/60 Hz 3 Before using remote control 4 Turn on your system Before using the remote control, remove the plastic shield from the battery holder. Remote control Plastic shield Press the ON/STAND-BY button to turn the power on. ON/ STAND-BY ON/ ECO MODE STAND-BY MUTE BASS TREBLE VOL PAIRING X-BASS BLUETOOTH AUDIO IN Battery holder GX-BT3 DIMMER TINSEA457AWZZ *TINSEA457AWZZLA*| RRMCGA343AWSA 13J R KI 1 GX-BT3_QG. indd 1 2013-09-17 09:04:23 5 Bluetooth one touch connection via NFC ■ NFC connection for audio playback Check that: ● Your device (smartphone/tablet) has an NFC function. ● NFC function on your device is enabled. ● Screen lock function of the device is off. [. . . ] ● The ‘connected’ message appears when the connection is complete. 3 Playback will start automatically, otherwise press play (on remote control or source device). ● Sound will be heard from the speakers of this unit via audio streaming. ● Your device must be within 10 metres from the unit. Various Bluetooth operation buttons (remote control only) Press the button to play or pause. Notes: ● To disconnect, simply touch your device to the tag again. ● Regardless of which tag you used to establish Bluetooth connection with this product, tapping your device to any of the NFC tags again, will disconnect the Bluetooth connection. ● To listen to audio via Bluetooth connectivity without NFC tag - refer “Pairing with other Bluetooth source devices” on page 7. ● It takes about 6-8 seconds for a Bluetooth enabled device (eg. smartphone) to establish Bluetooth connection with this unit via NFC or manual connection. 2 Peel the separator off the velcro tape (hook type) and stick it to the rear of the NFC tag. Then place the tag onto the desired location. Separator Velcro tape (hook type) rear view of the NFC tag 6 Listening to Bluetooth enabled devices PAIRING MUTE ON/ ECO MODE STAND-BY 4 Perform pairing procedure on the source device to detect this BASS TREBLE VOL BLUETOOTH GX-BT3 PAIRING X-BASS BLUETOOTH AUDIO IN DIMMER RRMCGA343AWSA ■ Pairing with other Bluetooth source devices 1 Press the ON/STAND-BY button to turn the power on. 2 Press the BLUETOOTH button on the remote control or FUNCTION button repeatedly on the main unit to select Bluetooth function. (Pairing indicator blinks. ) 3 Press and hold the PAIRING button for 3 seconds or more. The unit is now in pairing mode and is ready to be paired with other Bluetooth source device. unit. “SHARP GX-BT3” will appear in the detected devices list (if available) in the source device. [. . . ] 6 Pairing indicator (blue) will stop blinking once the unit is successfully paired with the source device. (Pairing information is now memorised in the unit. ) Some audio source devices may connect with the unit automatically after pairing is completed, otherwise follow the instructions in the source device operating manual to start connection. 7 Press the play button on remote control or source device to start Bluetooth streaming playback. GX-BT3_QG. indd 2 2013-09-17 09:04:25 [. . . ]