User manual SHARP HT-CN500DVE

[. . . ] Raadpleeg de bladzijden i t/m xii en N-1 t/m N-66. Favor consultar as pginas i a xii e P-1 a P-66. Please refer to pages i to xii and E-1 to E-66. Note: This product is not compatible with MTP and AAC file systems. HT-DV40H HT-DV50H i Quando il tasto ON/STAND-BY si trova in posizione STANDBY, allinterno dellapparecchio c ancora la corrente. Se il tasto ON/STAND-BY si trova nella posizione STANDBY, lunit pu essere accesa con il modo timer o con il telecomando. [. . . ] To confirm the time display: [When the unit is in the stand-by mode] Press the CLOCK/TIMER button. The time display will appear for about 10 seconds. [When the power is on] Press the CLOCK/TIMER button. Within 10 seconds, press the or button to display the time. The time display will appear for about 10 seconds. Note: The "CLOCK" will appear or time will flash to confirm the time display when the AC power supply is restored after a power failure or unplugging the unit. If incorrect, readjust the clock as follows. To readjust the clock: Perform "Setting the clock" from step 1. If the "CLOCK" does not appear in step 3, step 4 (for selecting the 24-hour or 12-hour display) will be skipped. To change the 24-hour or 12-hour display: 1 Clear all the programmed contents. [Refer to "Factory reset, clearing all memory" on page 63 for details. ] 2 Perform "Setting the clock" from step 1. 1 2 3 Press the ON/STAND-BY button to turn the power on. Within 10 seconds, press the VOLUME (+ or ) button to adjust the treble. E-31 -5 +5 Notes: The DVS default setting is "WIDE" mode. When setting the DVS mode to "WIDE" or "REFERENCE", the preset sound mode and Audistry (SOUND SPACE mode, MONO TO STEREO mode) are cancelled. (The NATURAL BASS mode and the INTELLIGENT VOLUME mode are not cancelled. ) Monaural signals do not generate surround effects. In case input signal is Dual mono type and DVS is set to "WIDE" or "REFERENCE", the sound may not be output correctly. When unit is turned on for the first time, selecting BASS mode using the SOUND MODE button will automatically set the DVS to OFF. Subsequently, when BASS mode is selected again, the DVS setting will follow the current user setting. When headphone is inserted, DVS setting and BASS/TREBLE setting, set earlier by user will be cancelled. However the DVS setting will not be recovered when the headphone is unplugged. HT-DV40H HT-DV50H Audistry sound mode ON The Dolby Virtual Speaker creates multichannel-like sound effects. Compared with the cinema mode, the bass sound level is slightly reduced. The Dolby Pro Logic indicator also lights up if 2ch sound signals are detected. Enjoy a variety of sounds by each or any combination of the 4 modes. [. . . ] Display Meaning E7 Malfunction of surround circuit. Place the unit away from noise source and plug the AC power lead into another wall socket. (*) ERROR The unit considers the DVD mechanism is defective. (*) FAN LOCK The cooling fan on the rear of the unit does not run. [. . . ]