User manual SHARP JX-300

[. . . ] 2 Adjusting the LCD Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Turning the "beep" On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Selecting the Guidance Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Enter the time and detail following the procedure for "(1) Enter the desired date in Calendar mode" from step 4 on page 10. · If an attempt is made to store an invalid date, you cannot move to the time entry prompt. Enter the correct date and follow the next procedure. to stop the alarm sound. 2. Schedule Alarm Schedule alarm sounds for approximately 20 seconds when the time set for a schedule listing is reached. Once a schedule item has been selected for the alarm and the alarm has been turned on, the alarm will sound automatically and the relevant item will be displayed even if the Organizer has been turned off. The alarm can also be set to sound for secret items without displaying the item. Turn the alarm sound on and off Pressing 2nd after the alarm setting, turns off the alarm sound while keeping the schedule alarm turned on. · A" " disappears, and the alarm sound is set to off. to set the alarm sound to on again, so that the " " is · Press 2nd displayed. · Setting the alarm sound (" " mark status) does not affect the setting of the schedule alarm (" " mark status) to each schedule listing. · The schedule alarm set for the schedule listing will sound when the " " is turned on and the time for each listing is reached. You cannot classify or declassify each listing. <Example> Set an alarm for June 22, 2001 (Meeting at 10:00AM 11:00AM). 1. Press SCHEDULE and enter the date, time, and schedule detail. Press 2nd and press ALARM ENTER to set the alarm to store. A " " is displayed on the left of the starting time for the scheduled item, and an alarm sound mark (" ") is displayed on the left of the display. 4 12 Expense Mode 2. Expense Summaries Expense summaries are a collection of records stored in Expense mode. You can recall them for a specific day or a certain period. (1) Summarizing an expense report for a specific day <Example> Specify the date, April 5, 2001. Press EXPENSE 1. Creating the Expense Records <Example> The date is April 5, 2001. You bought flight tickets for a business trip for $1, 200. 1. Press EXPENSE to enter the Expense mode. EXPENSE DATE?M/D/Y= 4/12/2001 to enter the Expense mode. 1 DAILY 2 PERIOD · The month and the day must be entered using 2 digits and the year using 4 digits. For single digit months or days, enter "0" before the single digit. · The date can be changed by pressing either 2. Enter the expense date and press ENTER . Press 2nd EXPENSE to enter the Expense report mode. <EXPENSE REPORT> 3. [. . . ] · The alarm sound on and off · The key touch tone on and off · The DST · The LCD contrast · The CAPS on and off · The memory of the calculator · The first display contents when you press SMBL Specifications Model: Display: Applications: JX-300/ZQ-540 120 × 40 dot matrix liquid crystal display Calendar, Schedule, To Do, Anniversary, Telephone, Memo, Expense, Expense Report, Clock, Calculation, Conversion 1MB Flash memory User area approx. 896 KB 2MB Flash memory User area approx. 1, 920 KB 10, 000 entries (Schedule 2, 500, TEL 2, 500, Memo 2, 500, To Do 1, 500, Expense 1, 000) in total 20, 000 entries (Schedule 5, 000, TEL 5, 000, Memo 5, 000, To Do 3, 000, Expense 2, 000) in total Memory capacity: JX-300: ZQ-540: Application capacity: JX-300: ZQ-540: These capacities assume the following average entry sizes. Schedule: 22 characters/entry Tel: 8 characters/entry in the name field 10 characters/entry in number field Memo: 12 characters/entry in title field 18 characters/entry in description field To Do: 30 characters/entry in description field Expense: 6 characters/entry in amount field 11 characters/entry in memo field 24 * Maximum storage in each application: 5, 000 entries Maximum data size per entry: Approx. [. . . ]