User manual SHARP KC-840E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP KC-840E. We hope that this SHARP KC-840E user guide will be useful to you.

Lastmanuals help download the user guide SHARP KC-840E.


Mode d'emploi SHARP KC-840E
Download

You may also download the following manuals related to this product:

   SHARP KC-840E (3766 ko)
   SHARP KC-840E (3766 ko)
   SHARP KC-840E (3766 ko)
   SHARP KC-840E (15894 ko)
   SHARP KC-840E annexe 1 (15894 ko)
   SHARP KC-840E annexe 2 (14743 ko)
   SHARP KC-840E annexe 3 (5091 ko)

Manual abstract: user guide SHARP KC-840E

Detailed instructions for use are in the User's Guide.

[. . . ] Please read before operating your new Air Purifier The air purifier draws in room air from the air intake, passes the air through a Pre-Filter, a Washable Deodorizing Filter and a HEPA Filter inside of the unit, then discharges the air through the air outlet. The Washable Deodorizing Filter gradually absorbs odours as they pass through the filter. Some odours absorbed by the filters may break down over time, resulting in additional odour. Depending on the usage environment, especially when the product is used in extreme environments (significantly more severe than normal household use), this odour may become strong in a shorter period than expected. [. . . ] With the unit OFF, press the Lights Control button for 3 seconds to turn the audible signal ON. Cancellation To cancel the audible signal, with the unit OFF, press the Lights Control button again more than 3 seconds. With the unit OFF, press the Fan Speed Button for 3 seconds. Note that if the Power OFF Button is not pushed within 8 seconds of adjusting sensor sensitivity, the setting will be saved automatically. The sensor sensitivity setting will be saved even if the unit is unplugged. To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically. When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. After 720 hours of use (30days × 24hours = 720) The Indicator Light will turn on after approximately 720 hours of use. after performing maintenance , reset the Filter Indicator. Plug the unit in, turn power ON, and press the RESET button for 3 seconds. the Filter Indicator Light will go off. Even if the Filter Indicator Light is already off, the RESET button should be pressed to reset the maintenance timer. Whenever dust accumulates on the unit or every 2 months Gently remove dust from the sensor opening and the back panel, using a vacuum cleaner attachment or similar tool. When the back panel has stubborn dirt In case of oily dirt, soak the back panel in water with kitchen detergent. Avoid scrubbing the back panel hard when washing. Rinse the back panel repeatedly with clean water to remove the solution residue. If it is very dirty, wash it gently with lukewarm water. Do not use any detergents or chemicals of any kind to clean the filter. Dry the filter completely before replacing in the unit. Do not operate unit without all filters properly installed. Care Cycle Whenever dust accumulates on the unit or every 2 months To prevent dirt or stains on the unit, clean regularly. If stains are allowed to remain, they may become difficult to remove. [. . . ] In other Countries outside the EU If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal. Die lights on the front panel are brighter. the Leuchtanzeigen auf der Vorderanzeige sind heller. Die lights on the front panel are darker. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP KC-840E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP KC-840E will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag