User manual SHARP LC-26D6U

[. . . ] Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. ASA DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] Pages 19-23 Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 45 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 38 Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 35 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 36 WSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 39 4:3 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 39 Rotate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 43 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 24 Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 35 Input Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 37 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Press c/d to select "Yes", and then press OK. · Auto search starts with the following order. 1 Programme auto search 2 Auto labelling 3 Auto sorting 4 Preset download 5 Press c/d to select "Yes", and then press OK. You can set language and country the same as in the initial auto installation. After this setting, auto search starts with the following order. 1 Programme auto search 2 Auto labelling 3 Auto sorting 4 Preset download 6 NOTE · See page 9 for details. · Do not turn off the TV while the message "Programme set-up completed" is displayed, for the TV is saving the data found while the message is displayed. You do not need to do anything during the auto search. NOTE · Do not turn off the TV while the message "Auto Installation completed" is displayed, for the TV is saving the data found while the message is displayed. 19 Basic adjustment settings Manual setting for each channel You can set some channel items manually. They are Fine (TV frequency), Colour sys. , Sound sys. , Label (Network name), Skip, Decoder, Lock (Child Lock) and Booster. You can select one of the following settings. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Setup". 1Fine 2Colour system (See page 21. ) 3Sound system (See page 21. ) 4Label (See page 21. ) 5Skip (See page 22. ) 6Decoder (See page 22. ) 7Lock (See page 22. ) 8Booster (See page 22. ) Fine tuning Press a/b to select "Programme Setup", and then press OK. If you already set the PIN, enter it here. · See page 45 for setting PIN. 1 Press a/b/c/d to select the channel you want to edit, and then press OK. · The selected channel information displays. 4 5 Press a/b to select "Manual Adjust", and then press OK. Press c/d to select "Yes", and then press OK. Programme Setup "Manual Adjust" menu 2 3 Press a/b to select "Fine", and then press OK. [. . . ] Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command. Command format Eight ASCII codes e CR C1 C2 C3 C4 P1 P2 P3 Command 4-digits Parameter P4 Command 4-digits: Command. Parameter 4-digits: Parameter 0 ­ 9, x, blank, ?Return code Parameter 4-digits Input the parameter values, aligning left, and fill with blank(s) for the remainder. [. . . ]