User manual SHARP LC-32D41U

[. . . ] LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ESPAÑOL FRANÇAIS LC-32D41U ENGLISH LC-32D41U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL · The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. · Menu items that are not selectable are grayed out. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Press c/d to select "Yes" or "No" for CABLE Analog, then press b to move down. Press c/d to select "Yes" or "No" for CABLE Analog & Digital, then press b to move down. Select "Search Start", and then press ENTER. · If you are only receiving an analog signal through the cable, select "Yes" for CABLE Analog. If you are receiving both an analog signal and a digital signal through the cable, select "Yes" for CABLE Analog & Digital. 2 3 7 Press c/d to select "Yes" or "No" for AIR Analog & Digital, then press b to move down. Press c/d to select "Yes" or "No" for CABLE Analog, then press b to move down. Press c/d to select "Yes" or "No" for CABLE Analog & Digital, then press b to move down. Select "Search Start", and then press ENTER. · If you are only receiving an analog signal through the cable, select "Yes" for CABLE Analog. If you are receiving both an analog signal and a digital signal through the cable, select "Yes" for CABLE Analog & Digital. 8 Press MENU to exit. 4 Press MENU to exit. NOTE · If no channel is found, confirm the type of connection made with your TV and try EZ Setup again. · If you select "Yes" for CABLE Analog and initiate the channel search, the CH Memory for CABLE Digital will be deleted. NOTE · If no channel is found, confirm the type of connection made with your TV and try channel search again. · If you select "Yes" for CABLE Analog and initiate the channel search, the CH Memory for CABLE Digital will be deleted. 21 Basic adjustment settings Channel memory setting 1 2 3 Press MENU and the MENU screen displays. 3 4 Press a/b to select "Antenna Setup DIGITAL", and then press ENTER. Press a/b to select "Signal Strength". · The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. Signal Strength Channel Strength Press c/d to select "Setup". Press a/b to select "CH Setup", and then press ENTER. · If you already set the Secret No. , input the 4-digit secret number here. See page 45 for setting a secret number. Signal Strength Current 0 Max 0 4 5 6 Press a/b to select "CH Memory", and then press ENTER. Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER. When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. 2 Press c/d to select "On", and then press ENTER. 5 Press MENU to exit. Channel Strength The channel signal strength can also be checked separately. 1 2 3 Repeat steps 1 to 3 in Signal Strength in Antenna Setup - DIGITAL Press a/b to select "Channel Strength", and then press ENTER. Input the 2-digit channel number to check the signal strength of the selected channel. · Make sure the signal is strong enough for each channel. Signal Strength Channel Strength When viewing DIGITAL broadcasts: 1 Press a/b to select the channel to skip, and then press c/d to select "On". (Channel selection disabled using CH r/s. ) · Off: Does not skip channels. (Channel selection enabled using CH r/s. ) 7 Press MENU to exit. 1 2 CH Signal Strength NOTE · Make sure what kind of connection is made with your TV. Current 0 Max 0 Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup - DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength Press MENU and the MENU screen displays. 4 Press MENU to exit. NOTE · This function is available for DIGITAL (Air) only. 1 2 Press c/d to select "Setup". 22 Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Optional accessory The listed optional accessory is available for the Liquid Crystal Television. Please purchase it at your nearest shop. · Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. Part name Wall mount bracket Part number AN-37AG2 58 Dimensional drawings Unit: inch/(mm) 243/32 (612) 321/16 (814) 445/64 (119) 447/64 (120) 279/16 (699. 8) 2541/64 (651) 1517/32 (394. 4) 2315/64 (590) 213/32 (61) 153/4 (400) 121/64 (305) 77/8 (200) 77/8 (200) 361/64 (100) 59 CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Setup". Press a/b to select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", and then the Secret number input screen displays. MENU [Setup . . . [. . . ]