User manual SHARP LC-32G4U

[. . . ] LC-37G4U LC-32G4U TU-GA1U-S LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL Display Model No. : Serial No. : AVC System IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV and the AVC System. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · Balance and Audio Quality Control are grayed out when Dolby Virtual is set to "On". · For resetting all adjustment items to factory preset values, press a/b to select "Reset", press OK, press c/d to select "Yes", and then press OK. · You can choose Dolby Virtual by pressing Virtual on the remote control unit. · Audio menu is grayed out when Output Select is set to "Variable" or when headphones are in use. · Balance and Audio Quality Control are grayed out when Dolby Virtual is set to "On". · For some discs, setup may be required on your DVD. In this case, please refer to the operation manual of your DVD player. · You may not get the Dolby Virtual Surround effect if you adjust "Treble" or "Bass" setting. 41 Basic adjustment settings Power control Power control setting allows you to save energy. Power control for AV source No signal off When set to "Enable", the power will automatically shut down if no signal inputs for 15 minutes. No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. 1 2 3 Press MENU and the MENU screen displays. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Power Control". Press c/d to select "Power Control". Press a/b to select "No Signal Off", and then press ENTER. MENU [Power Control . . . No Signal Off] Setup [Disable] [Disable] Power Control No Signal Off No Operation Off Press a/b to select "No Operation Off", and then press ENTER. MENU [Power Control . . . No Operation Off] Setup [Disable] [Disable] Power Control No Signal Off No Operation Off 4 Press c/d to select "Enable", and then press ENTER. 4 Press c/d to select "Enable", and then press ENTER. Enable Disable Enable Disable · Five minutes before the power shuts down, remaining time displays every minute. · Five minutes before the power shuts down, remaining time displays every minute. NOTE · "Disable" is factory preset value. · When a TV program finishes, and the AVC System receives signal input, this function may not operate. NOTE · "Disable" is factory preset value. 42 Basic adjustment settings Power control for PC source Power control setting allows you to save energy. Power management When set, the power will automatically shut down. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Power Control". Press a/b to select "Power Management", and then press ENTER. MENU [Power Control . . . Power Management] Setup [Off] Power Control Power Management 4 Press a/b to select "Mode1" or "Mode2", and then press ENTER. Off Mode1 Mode2 Selected item Off Description · No power management · Factory preset value. · If no signal inputs for 8 minutes, the power shuts down. · Even if you start using the PC and the signal inputs again, the System stays off. · The System turns on again by pressing POWER button on the Display or TV POWER on the remote control unit. · If no signal inputs for 8 seconds, the power shuts down. · When you start using the PC and the signal inputs again, the System turns on. Mode1 Mode2 43 Using memory card Important notes on using memory cards · We will not be liable for misuse of the LCD TV set, any troubles during use, or other problems, or any damages arising out of the use of the LCD TV set, except for the cases for which we are liable by statute. · If you or other people misuse the LCD TV set, or the LCD TV set is affected by static electricity or electrical noise, the recorded data may be in danger of being changed or lost. · If you are making a record of importance, run a test in advance to ensure that the recording would be performed correctly in terms of picture or sound quality. · We do not capture responsibility nor compensate even if pictures or sound could not be recorded correctly because of troubles. Copyright Duplicating images and music by copying and/or editing from videocassettes and/or TV programs that are subject to copyrights is only permitted when the edited or copied versions are used for personal pleasure. With the exception of cases when the user personally is the owner of the copyrights of the object in question or when specific and written permission has been obtained from the owner(s) of the object in question, the user is not permitted to make copies and/or duplications and/or edited versions as this constitutes a violation of the copyright laws, possible exposing the user to demands for compensation for damages. [. . . ] Model Specific Section Your Product Model Number & Description: LC-37G4U LCD Color Television LC-32G4U LCD Color Television TU-GA1U-S LCD Color Television (Be sure to have this information available when you need service for your Product. ) One (1) year parts and labor from the date of purchase. From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. Contact your Sharp Authorized Servicer to obtain in-home service for this Product. [. . . ]