User manual SHARP LC-37D44S

[. . . ] PORTUGUS LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD TELEVISOR DE CRISTAL LQUIDO OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO MANUAL DE OPERAO ESPAOL NEDERLANDS ITALIANO FRANAIS DEUTSCH LC-37D44E LC-37D44S ENGLISH SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or )5) and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] Select "Analogue" for audio signal via the AUDIO jack. HDMI Setup items Signal Type* Colour Matrix* Dynamic Range* Normal/Enhanced Auto View Disable/Enable Audio Select** Digital/Analogue NOTE Refer to your external equipment operation manual for the signal type. Items marked * may be greyed out (with 4) depending on the type of signal input from the external equipment. Item marked ** is only available when EXT6 is selected. 19 Useful features WIDE MODE TV/AV only WIDE MODE You can select the picture size. PC only You can select the picture size. Selectable picture size varies with the type of signal received. Item (for SD (Standard-Definition) signal) Normal: For 4:3 "standard" pictures. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes. Panorama: In this mode the picture is progressively stretched toward each side of the screen. Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Item (for HD (High-Definition) signal) Full: Display with the Overscan image. Crop all sides of screen. 1 2 Press f. The WIDE MODE menu displays. Press f or a/b to select a desired item on the menu. NOTE Connect the PC before making adjustments. (See page 10. ) Selectable picture size may vary with input signal type. EXAMPLE Normal Full Manual Selection 1 2 Press f. The WIDE MODE menu displays. The menu lists the wide mode options selectable for the type of video signal currently received. Item Normal: Keeps the original aspect ratio in a full screen display. Full: An image fully fills the screen. Press f or a/b while the WIDE MODE menu displays on the screen. As you toggle down the options, each is immediately reflected on the screen. No need to press OK. Auto Selection If you set WSS and 4:3 Mode in the Setup menu on page 18, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information. WSS menu To enable Auto Selection, set WSS in the Setup menu to "On". (See page 18. ) 4:3 Mode menu To set the type of the wide screen, select "Normal" or "Panorama" in the 4:3 Mode menu. (See page 18. ) 4:3 Mode set to "Normal" 4:3 Mode set to "Panorama" NOTE If the signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled. 20 Useful features Still image You can freeze a motion picture on the screen. Time display You can display the time information included in the DTV and Teletext broadcasts. NOTE Skip step 1 if receiving DTV broadcasts. 1 2 Press 3. Press 3 again to exit still image. NOTE When this function is not available, "No still image display available. " will display. The still image automatically goes out after 30 minutes. 1 2 3 Select a TV channel providing Teletext information. (The time information is automatically captured. ) Press p. The channel display will appear on the TV. [. . . ] When purchasing, please read the newest catalogue for compatibility and check the availability. Part name Wall mount bracket (LC-37D44E, LC-37D44S) Part number AN-37AG5 35 A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. [. . . ]