User manual SHARP LC-37GA6E

[. . . ] The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1 ENGLISH IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. [. . . ] · To exit the Channel search screen, select "Cancel", and then press ENTER. 6 When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press ENTER. When "Cable" is selected in Antenna setting: Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts or "Analog Search Start" to search only analog broadcasts, and then press ENTER. · The Channel search will start automatically. · To exit the Channel search screen, select "Cancel", and then press ENTER. 7 Press MENU to exit. 4 NOTE · If no channel is found, confirm the type of connection made with your TV and try EZ Setup again. · If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted. Press MENU to exit. NOTE · If no channel is found, confirm the type of connection made with your TV and try channel search again. · If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted. 22 Basic adjustment settings Channel memory setting 3 Press a/b to select "Signal Strength". · The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. Signal Strength Channel Strength 1 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "CH Setup", and then press ENTER. · If you already set the Secret No. , input the 4-digit secret number here. See page 40 for setting a secret number. Signal Strength 3 4 5 Press a/b to select "CH Memory", and then press ENTER. Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER. When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. 2 Press c/d to select "On", and then press ENTER. Press MENU to exit. 1 2 3 Press MENU to display the MENU screen, and then press c/d to select "Picture". Press a/b to select "OPC". Press c/d to select "On" or "On: Display". Selected item Off On On: Display Description The brightness is fixed at the value set in "Backlight". Automatically adjusts Displays the OPC effect on the screen while adjusting the brightness of the screen. NOTE · For resetting all Picture adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER. Picture Audio 4 OPC Backlight Contrast Off [b12] a16 [b30] 0 On On : Display b16 b40 b30 b30 b30 b10 Press MENU to exit. Brightness [ Color Tint [ [ 0] a30 0] a30 0] a30 Sharpness [ b2] a10 Advanced Reset NOTE · When set to "On", the OPC senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light. · When set to "On: Display", OPC effect displays on the screen while the OPC adjusts the screen brightness. Selected item Backlight Contrast Brightness Color Tint Sharpness cbutton The screen dims For less contrast For less brightness For less color intensity Skin tones become purplish For less sharpness dbutton The screen brightens For more contrast For more brightness For more color intensity Skin tones become greenish For more sharpness NOTE · Select "Advanced" and then press ENTER to set "Color Temp. ", "Black", "I/P Setting", "Film Mode", "3D-Y/C", "Monochrome" or "Range of OPC". See page 26. 25 Basic adjustment settings Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. Film Mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. Selected item On Off Description Detects, analyzes, converts film source Normal viewing mode 1 2 3 Press MENU to display the MENU screen, and then press c/d to select "Picture". Press a/b to select "Advanced", and then press ENTER. Press a/b to select a specific adjustment item, and then press ENTER. · You can select "Color Temp. ", "Black", "I/P Setting", "Film Mode", "3D-Y/C", "Monochrome", or "Range of OPC". NOTE · "Film Mode" does not function when you set: -- the "AV Mode" to "Game" or -- the "I/P Setting" to "Fast". 4 5 Press a/b (or c/d) to select the desired parameter. · See the table for the selectable parameters. 3D-Y/C Provides high quality images with minimal dot crawl and cross color noise. Selected item Slow For still images Normal adjustment For moving images For Game Mode Description Press MENU to exit. Color Temperature For a better white balance, use color temperature correction. Selected item High Mid-High Middle Mid-Low Low Description White with Bluish tone Standard Fast Off (2D) NOTE · 3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable). White with Reddish tone Monochrome For viewing a video in monochrome. Black Changes the viewing depth by automatically adjusting the dark portion of an image for easier viewing. Selected item On Off Description For high detail in black portions No adjustment Selected item On Off Description For viewing in monochrome Normal color Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of f16. Selected item Max. Description f15 through e16 f16 through e15 I/P Setting Converts input signals depending on the type of images. Selected item Fast Slow Description Suitable for fast-moving images Suitable for smooth images with low amounts of flickers NOTE · "I/P Setting" is not selectable when channel display shows an input resolution of 480P, 720P, or 1080I. 26 NOTE · The range of OPC settings are active only when the OPC is set to On. · The maximum setting cannot be set to a smaller number than the minimum setting. [. . . ] aaaa Option 3 Press and hold both CHr and VOLk on the TV simultaneously until the message appears on the screen. The secret number is . NOTE · As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place. 53 Appendix Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement. [. . . ]