User manual SHARP LC-37HV4U

[. . . ] OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIN MANUAL DE OPERAO PORTUGUS LIQUID CRYSTAL TELEVISION TLVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO TELEVISOR DE CRISTAL LQUIDO ESPAOL FRANAIS LC-37HV4U ENGLISH LC-37HV4U LIQUID CRYSTAL TELEVISION ENGLISH ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. [. . . ] Color Temp Black 3D-Y/C Monochrome Film Mode I/P Setting Mid-Low Low High Mid-High Mid 5 Press a/b to select the desired level, and then press SET/ENTER. Description No adjustment For high detail in black portions For low detail in black portions Selected item Off High Low 5 Press a/b to select the desired level, and then press SET/ENTER. Description White with Bluish tone Selected item High Mid-High Mid Mid-Low Low 34 White with Reddish tone Basic adjustment settings 3D-Y/C Provides high quality images with minimal dot crawl and cross color noise. MENU Monochrome For viewing a video in monochrome. TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE POWER 1 Press MENU and the TV MENU screen displays. Press c/d to select "Picture". SET/ ENTER DTV/SAT INFO 2 3 FAVORITE CH A POWER B INPUT C VOL VCR REC D VOL Press a/b to select "Advanced", and then press SET/ENTER. TV MENU Picture Audio RECEIVER 1 Press MENU and the TV MENU screen displays. Press c/d to select "Picture". USER TV Contrast [+30] 0 30 30 30 10 +40 +30 +30 +30 +10 Brightness [0] Color Tint [0] [0] 2 3 Press a/b to select "Advanced", and then press SET/ENTER. TV MENU Picture Audio Sharpness [0] Advanced Reset USER TV Contrast [+30] 0 30 30 30 10 +40 +30 +30 +30 +10 Brightness [0] Color Tint [0] [0] 4 Press a/b to select "Monochrome", and then press SET/ENTER. TV MENU Picture Advanced USER TV C. Color Temp Sharpness [0] Advanced Reset Black 3D-Y/C Monochrome Film Mode I/P Setting On Off 4 Press a/b to select "3D-Y/C", and then press SET/ENTER. TV MENU Picture Advanced USER TV C. Color Temp Black 3D-Y/C Monochrome Film Mode I/P Setting Standard Fast Slow 5 Press c/d to select "On", and then press SET/ENTER. Description Normal color For viewing in monochrome Selected item Off On 5 Press a/b to select the desired level, and then press SET/ENTER. Description Normal adjustment For movie image For still image Selected item Standard Fast Slow NOTE "3D-Y/C" is not selectable when receiving images from DVI or component video terminals. 35 Basic adjustment settings Film mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyses it then recreates each still film frame for high-definition picture quality. MENU I/P Setting Adjusting the image and input signal can give you a more beautiful picture. MENU TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE POWER RETURN SOURCE POWER SET/ ENTER DTV/SAT INFO SET/ ENTER FAVORITE CH DTV/SAT INFO VCR REC FAVORITE CH VCR REC 1 2 3 Press MENU and the TV MENU screen displays. Press c/d to select "Picture". 1 Press MENU and the TV MENU screen displays. Press c/d to select "Picture". 2 3 Press a/b to select "Advanced", and then press SET/ENTER. TV MENU Picture Audio Press a/b to select "Advanced", and then press SET/ENTER. TV MENU Picture Audio USER TV Contrast [+30] 0 30 30 30 10 +40 +30 +30 +30 +10 Brightness [0] USER TV Contrast [+30] 0 30 30 30 10 +40 Brightness [0] Color Tint [0] [0] +30 Color Tint +30 Advanced +30 Reset +10 [0] [0] Sharpness [0] Sharpness [0] Advanced Reset 4 Press a/b to select "I/P Setting", and then press SET/ENTER. Some items may be grayed out. They are not selectable. TV MENU Picture Advanced USER TV C. Color Temp Black 3D-Y/C Monochrome Film Mode I/P Setting Interlace Progressive 4 Press a/b to select "Film Mode", and then press SET/ENTER. Some items may be grayed out. They are not selectable. TV MENU Picture Advanced USER TV C. Color Temp Black 3D-Y/C Monochrome Film Mode I/P Setting On Off 5 Press c/d to select "Interlace" or "Progressive", and then press SET/ENTER. 5 Press c/d to select "On", and then press SET/ENTER. Description Normal viewing mode Detects, analyzes, converts film source Selected item Off On NOTE I/P Setting is set to Progressive when Film Mode is "On". "I/P Setting" is not selectable when channel display shows an input resolution of 480P, 720P or 1080I. 36 Basic adjustment settings Sound adjustment You can adjust the sound quality to your preference with the following settings. MENU TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE POWER SET/ ENTER DTV/SAT INFO FAVORITE CH A POWER B INPUT C VOL VCR REC D VOL RECEIVER 1 2 Press MENU and the TV MENU (PC MENU) screen displays. Press c/d to select "Audio". TV MENU Audio Power control USER TV Treble Bass Balance Speaker Reset [0] [0] [0] 15 15 L +15 +15 R [Internal] 3 Press a/b to select a specific adjustment item. Press c/d to adjust the item to your desired position. cbutton For weaker treble 4 Selected item Treble Bass Balance dbutton For stronger treble For weaker bass For stronger bass Decrease audio from Decrease audio from the right speaker the left speaker NOTE When all adjustments set to factory preset values, 1 Press a/b to select "Reset", and then press SET/ ENTER. 2 Press c/d to select "Yes", and then press SET/ ENTER. 37 Basic adjustment settings Power control Power control setting allows you to save energy. MENU TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE POWER SET/ ENTER DTV/SAT INFO FAVORITE CH A POWER B INPUT C VOL VCR REC D VOL RECEIVER Power control for AV source Power save When set to "Manual" or "Auto", power consumption is reduced by decreasing backlight brightness. 1 2 3 Press MENU and the TV MENU screen displays. Press c/d to select "Power control". Press a/b to select "Power Save", and then press SET/ENTER. TV MENU Power control Power Save No Signal Off No Operation Off Setup [Manual] [Disable] [Disable] 4 Press c/d to select the desired backlight brightness, and then press SET/ENTER. TV MENU Power control Power Save Manual Auto [+4] 4 +4 NOTE When setting to "Auto", the OPC indicator lights up green, senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. 38 Basic adjustment settings No signal off When set to "Enable", the power will automatically shut down if no signal inputs for 15 minutes. MENU No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. MENU TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE POWER RETURN SOURCE POWER SET/ ENTER DTV/SAT INFO SET/ ENTER DTV/SAT INFO FAVORITE CH A POWER B INPUT C VOL VCR REC FAVORITE CH A POWER B INPUT C VOL VCR REC D VOL D VOL RECEIVER RECEIVER 1 Press MENU and the TV MENU screen displays. Press c/d to select "Power control". 1 Press MENU and the TV MENU screen displays. Press c/d to select "Power control". 2 3 2 3 Press a/b to select "No Signal Off", and then press SET/ENTER. TV MENU Power control Power Save No Signal Off No Operation Off Setup [Manual] [Disable] [Disable] Press a/b to select "No Operation Off", and then press SET/ENTER. TV MENU Power control Power Save No Signal Off No Operation Off Setup [Manual] [Disable] [Disable] 4 Press c/d to select "Enable", and then press SET/ENTER. TV MENU Power control No Signal Off 4 Press c/d to select "Enable", and then press SET/ENTER. TV MENU Power control No Operation Off Enable Disable Enable Disable Five minutes before the power shuts down, remaining time displays every minute. Five minutes before the power shuts down, remaining time displays every minute. NOTE "Disable" is factory preset value. When a TV program finishes, and the AVC System receives signal input, this function may not operate. NOTE "Disable" is factory preset value. 39 Basic adjustment settings Power control for PC source Power control setting allows you to save energy. MENU Power management When set, the power will automatically shut down. TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE POWER 1 Press MENU and the PC MENU screen displays. Press c/d to select "Power control". SET/ ENTER DTV/SAT INFO 2 3 FAVORITE CH A POWER B INPUT C VOL VCR REC D VOL Press a/b to select "Power Management", and then press SET/ENTER. PC MENU Power control Power Save Setup [Manual] [Off] RECEIVER Power save 1 2 3 Press MENU and the PC MENU screen displays. [. . . ] From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. Contact your Sharp Authorized Servicer to obtain in-home service for this Product. The Servicer will come to your home and if it is necessary to remove the Product, the Servicer will reinstall it. [. . . ]