User manual SHARP LC-52D92U

[. . . ] LC-46D92U LC-52D92U LIQUID CRYSTAL TELEVISION TLVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LQUIDO TELEVISOR DE CRISTAL LQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIN MANUAL DE OPERAO IMPORTANT: please read this operation manual before starting operating the equipment. IMPORTANTE: Lea este manual de operacin antes de comenzar a operar el equipo. PORTUGUS ESPAOL FRANAIS ENGLISH LC-46D92U LC-52D92U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. Menu items that are not selectable are grayed out. The examples used throughout this manual are based on the LC-52D92U model. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. [. . . ] Press a/b to select "CH Search", and then press ENTER. When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press ENTER When "Cable" is selected in Antenna setting: Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts or "Analog Search Start" to search only analog broadcasts, and then press ENTER. The Channel search will start automatically. To exit the Channel search screen, select "Cancel", and then press ENTER. 6 When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press ENTER. When "Cable" is selected in Antenna setting: Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts or "Analog Search Start" to search only analog broadcasts, and then press ENTER. The Channel search will start automatically. To exit the Channel search screen, select "Cancel", and then press ENTER. 7 Press MENU to exit. 4 NOTE If no channel is found, confirm the type of connection made with your TV and try EZ Setup again. If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted. Press MENU to exit. NOTE If no channel is found, confirm the type of connection made with your TV and try channel search again. If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted. 24 Basic adjustment settings Channel memory setting 1 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "CH Setup", and then press ENTER. If you already set the Secret No. , input the 4-digit secret number here. See page 43 for setting a secret number. 3 Press a/b to select "Signal Strength". The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. Signal Strength Channel Strength Signal Strength Current 0 Max 0 3 4 5 Press a/b to select "CH Memory", and then press ENTER. Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER. When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. 2 Press c/d to select "On", and then press ENTER. 4 Press MENU to exit. Channel Strength The channel signal strength can also be checked separately. 1 2 3 Repeat steps 1 to 2 in Signal Strength in Antenna Setup - DIGITAL Press a/b to select "Channel Strength", and then press ENTER. Input the 2-digit channel number to check the signal strength of the selected channel. Make sure the signal is strong enough for each channel. Signal Strength Channel Strength When viewing DIGITAL broadcasts: 1 Press a/b to select the channel to skip, and then press c/d to select "On". (Channel selection disabled using CH r/s. ) Off: Does not skip channels. (Channel selection enabled using CH r/s. ) 6 Press MENU to exit. 1 2 CH Signal Strength NOTE Make sure what kind of connection is made with your TV. Current 0 Max 0 Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup - DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "Antenna Setup DIGITAL", and then press ENTER. 4 Press MENU to exit. NOTE This function is available for DIGITAL (Air) only. 1 2 25 Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Using FAVORITE CH on the remote control unit Using Favorite CH on the menu screen You can also set your favorite channels in "Option" on the MENU screen. 1 2 3 4 Select the channel you want to register as a favorite channel. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Optional accessory The listed optional accessory is available for the Liquid Crystal Television. Please purchase it at your nearest shop. Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. Part name Wall mount bracket Model number AN-52AG1 57 CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", and the Secret number input screen displays. Setup Secret No. [. . . ]