User manual SHARP LC-52LE822E

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable. When playing the HDMI image, the best possible format for the picture will be detected and set automatically. HDMI-certified cable 3. 5 mm stereo minijack cable DVI/HDMI cable Supported video signal 576i, 576p, 480i, 480p, 1080i, 720p, 1080p See page 38 for PC signal compatibility. 16 Connecting external devices SCART connection Example of connectable devices E Decoder Example of connectable devices E VCR E DVD player/recorder If your VCR supports TV-VCR advanced AV Link systems, you can connect the VCR using a fully wired SCART cable. Decoder VCR Decoder SCART cable NOTE SCART cable In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder is connected in "Manual adjust" in the "Analogue setting" menu (Page 29). TV-VCR advanced AV Link systems may not be compatible with some external sources. You cannot connect the VCR with decoder using a fully wired SCART cable when selecting "Y/C" under "EXT 2" in the "Input select" menu. Controlling devices with SCART using AV Link This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual equipment. One touch play TV standby WYSIWYR Preset download While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source (e. g. , VCR, DVD player/recorder). When the TV enters standby mode, the connected audiovisual equipment (e. g. , VCR, DVD player/ recorder) enters standby mode as well. When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start recording by pressing the WYSIWYR button. Automatically transfers the channel preset information from the tuner on the TV to the one on the connected audiovisual equipment (e. g. , VCR) via the EXT 2 terminal. NOTE Refer to the operation manuals of external equipment for details. The AV Link function works only when audiovisual equipment is connected to the EXT 2 terminal with a fully wired SCART cable. The use of the AV Link function is only possible if the TV has enforced a complete auto installation with the connected audiovisual equipment (refer to Initial auto installation on page 9). The availability of the AV Link function depends on the audiovisual equipment used. The media type changes every time you press ;. By AQUOS SP You can choose to listen to the TV sound only from the AQUOS TV speaker system. Model select If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. Press a/b to select "By AQUOS SP", and then press ;. Sound mode change You can manually change the AQUOS AUDIO speaker system's sound mode. Press a/b to select "Model select", and then press ;. The HDMI device changes every time you press ;. Recorder EPG You can call up the CEC-compatible recorder's EPG and preset timer recordings using the TV's remote control unit. 1 2 Press a/b to select "Sound mode change". The sound mode changes every time you press ;. Refer to the operation manual of the AQUOS AUDIO speaker system for details. 1 Press a/b to select "Recorder EPG", and then press ;. The external input source switches and the recorder's EPG is displayed. 2 Select the programme to record. Refer to the operation manual of the recorder for details. 21 Menu operation What is the MENU? You need to call up the OSD to perform settings for the TV. The OSD for the settings is called "MENU". The "MENU" enables various settings and adjustments. Basic operation Display the MENU screen Press @ and the "MENU" screen displays. LCFONT embedded Picture Select an item Press a/b/c/d to select/adjust the desired menu, and adjust the item to the desired level, and then press ;. Press 6 to return to the previous "MENU" page. Selecting in the MENU DYNAMIC OPC Backlight Contrast Brightness Colour Tint Sharpness Advanced Reset [Off] ECO picture control Energy save No signal off No operation off Sleep timer [On] [Off] [Disable] [Disable] Selecting options Exit the MENU screen The operation will exit the "MENU" screen if you press > before it is completed. Yes No LCFONT This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. NOTE "MENU" options differ in the selected input modes, but the operating procedures are the same. Items with 4 cannot be selected for various reasons. The "MENU" screen will disappear if left unattended for several seconds. Operation without a remote control unit This function is useful when there is no remote control unit within your reach. 1 2 3 Press @ and the "MENU" screen displays. Press :r/s instead of a/b or i+/- instead of c/d to select the item. [. . . ] Press c/d to select "Yes" to update the system, and then press ;. Press ; to automatically reset and start the update operation. This operation may take a while. The TV starts updating the system CAUTION Be sure to insert the USB device correctly into the terminal. A confirmation message appears on the screen after completing the update and then automatically restarts the TV. Press ; to complete the operation. Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. [. . . ]