User manual SHARP LC-60LE636S

[. . . ] MODEL LC-60LE635E LC-60LE635RU LC-60LE636E LC-60LE636S OPERATION MANUAL LCD COLOUR TELEVISION CE Statement: Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www. sharp. de/doc/ WN8522D_7. pdf. NOTE The wireless LAN USB adapter is designed for indoor use only. ASA Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. [ ENGLISH ] Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Dear SHARP customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After selecting "Yes" on the screen, press a/b/c/d to select the channel you want to set and then press ;. NOTE Skip · The name can be five characters or less. E Sort Channel positions can be sorted freely. 1 Press c/d to select "Yes", and then press ;. 2 Press a/b/c/d to select the channel you want to move, and then press ;. 3 Press a/b/c/d to move it to the desired position, and then press ;. 4 Repeat steps 2 and 3 until all desired channels are sorted. E Erase programme Channels can be erased individually. 1 Press c/d to select "Yes", and then press ;. 2 Press a/b/c/d to select the channel you want to erase, and then press ;. · A message window pops up. Fine You can adjust the frequency to the desired position. 3 Press c/d to select "Yes", and then press 4 NOTE · Adjust while checking the background picture as a reference. · Instead of pressing c/d to adjust the frequency, you can set by directly entering the frequency number of the channel with 0_9 numeric buttons. Channels with "Skip" set to "On" are passed over when using :r/s even if selected while watching the image from the TV. ; to erase the selected channel. Repeat steps 2 and 3 until all desired channels are erased. Lock You can block the viewing of any channel. EXAMPLE NOTE · 179. 25 MHz: Press 1 > 7 > 9 > 2 > 5. · 49. 25 MHz: Press 4 > 9 > 2 > 5 > ;. Colour sys. Select the optimum colour system to receive ("Auto", "PAL", "SECAM"). · See "PIN" for setting a PIN. · When "Lock" is set to "On" for a channel, "Child lock has been activated" displays, and the image and sound of the channel are blocked. · When pressing 6 while "Child lock has been activated" displays, the PIN input window will display. Inputting the correct PIN unlocks the "PIN" temporarily until the power is turned off. 38 Basic adjustment TV start-up time setting View setting 3 Enter the same four-digit number as in step 2 to confirm. · "The system PIN has been changed successfully" displays. Individual setting - Time View setting Quick start You can reduce the TV's start-up time after turning on the power with the remote control unit. Go to "Menu" > "Setup" > "View setting" > "Quick start". Item The TV quickly starts up from standby. 14 W or more of power consumption is required during standby. Power consumption is small during standby. 4 Press ;. NOTE · As a precautionary measure, make a note of your PIN and keep it in a safe place that children cannot reach. · "0000" cannot be set as the PIN code. · To view a locked channel, you must enter the PIN (see pages 37 and 38 for locking channels from viewing in DTV, SAT and ATV mode). When you select a locked channel, a PIN prompt message pops up. Press 6 to display the PIN input window. View setting Time display Go to "Menu" > "Setup" > "View setting" > "Individual setting" > "Time display". Time display This function allows you to display the clock time in the lower-right corner of the screen. On On (half-hourly) Off Item Displays the clock time. Displays the clock time in 30-minute increments. [. . . ] The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. · Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. [. . . ]